NFC Services

The New3DS NFC module was added with 8.1.0-0_New3DS. The Old3DS NFC module was added with 9.3.0-X.

On New3DS NFC module uses the NFC hardware via the i2c::NFC and gpio:NFC services. On Old3DS NFC module communicates with a NFC peripheral via IR with the IRUSER service.

Only 1 session can be open for all of these services combined. Commands for each service are handled by the main-thread.

NFC services

NFC user service "nfc:u"

This is the NFC service used by regular applications, for the NFP API.

This was first seen in the Super Smash Bros eShop demo (only in the exheader, the demo doesn't actually use it), but at that time no system-module was available for NFC on CDN. The first regular application to use this service was Super Smash Bros, with the v1.0.5 game-update, which used the new 9.3.0-X command set.

NFC management service "nfc:m"

Command Header	Available since system-version	Name	Input	Output	Notes
0x040100C2	Unknown, <9.3.0-X	???	u32 unknownA, u32 unknownB, u32 unknownC, u32 (sizeof(*buffer) << 14 | 0x402), void * buffer	s32 result	Used when resetting an amiibo from amiibo Settings.
0x04020000	9.3.0-X	GetAdminInfo
0x04030000	9.3.0-X	GetEmptyRegisterInfo
0x04040A40	9.3.0-X	SetRegisterInfo
0x04050000	9.3.0-X	DeleteRegisterInfo
0x04060000	9.3.0-X	DeleteApplicationArea
0x04070000	9.3.0-X	ExistsApplicationArea
0x04080000	9.3.0-X	???	void	s32 result, u32 unknownA
0x040C0000	9.3.0-X	?	None	s32 result	Among other things, this will eventually call the savedata writing code referenced in the below savedata section.
0x040D0000	9.3.0-X	???	void	s32 result
0x040E0000	9.3.0-X	???	void	s32 result, u32 unknownA, u32 unknownB	Again, amiibo applet ignores value unknownA.
0x040F0000	9.3.0-X	???	void	s32 result, u32 unknownA, u32 unknownB

This is used by the amiibo Settings applet. This service has the above commands, in addition to the command-set listed below.

NFC development service "nfc:dev"

Command header	Available since system-version	Description
0x00110100		ReadRawPages
0x001200C0		WriteRawPage

Some of these commands seems to be intended for use only on dev-units.

Unlike the New3DS NFC-module, at least some of these commands are stubbed in the Old3DS NFC-module(only returns an error).

NFC service "nfc:p"

Command header	Available since system-version	Description
0x00010000		Initialize
0x00020000		Shutdown
0x00030080		(unk0, unk1) ?
0x00040000		?
0x000500C2		SendTagCommand
0x00060000		GetTagInfo
0x00070000		GetTagState maybe? Writes an output value to cmdreply[2].
0x00080000		Writes a handle to cmdreply[3].
0x00090000		Writes a handle to cmdreply[3].
0x000A0000		Unknown. Writes an output value to cmdreply[2].
0x000B0000		Unknown. Writes 0x60-bytes of output starting at cmdreply[2]. u16 +0 is the size of the data at +4, +2 is not initialized, u8 +3 is loaded from state, u32 +0x2C is loaded from state, and the data at +4 with the previously mentioned size is copied from state.
0x000C0040		(u32 outputsize) Writes output to static_buf_id=0, outputsize 1 is used when it's >=1.
0x000D0040		(u32 outputsize) Writes output to static_buf_id=0, outputsize 1 is used when it's >=1.
0x000E0080		(u8 unk, u32 outputsize) Writes output to static_buf_id=0, outputsize 2 is used when it's >=2.
0x000F0040		(u32 outputsize) Writes output to static_buf_id=0, outputsize 2 is used when it's >=2.
0x00100000		Unknown.
0x00110000		Unknown.
0x00120000		Unknown. Writes an output u32 to cmdreply[2].
0x00130000		Unknown. Writes an output u32 to cmdreply[2].

This service is used by the mint library-applet, starting with 9.3.0-21. This service was added to the mint service-access-control list with 9.0.0-20. The mint process is the only known eShop-related process using this service(eShop-application and NIM-module don't use it). Used for NFC card payments in JPN eShop(the v16384 mint title is identical for USA/JPN besides programIDs in the NCCH header/exheader).

JPN eShop game "Megami Meguri" uses these same JPN NFC cards. The only accessible NFC service is nfcu.

NFC service "nfc:r"

This service has no known use.

NFC service "nfc:s"

Command header	Available since system-version	Description
0x00130102		SendTagCommand
0x00230000		This writes the following command request data to I2C, without reading any response: 10 20 00 01 01.
0x00240000		This writes the following command request data to I2C, without reading any response: 10 40 00 03 00 0F 01.

This service has no known use.

Unlike the New3DS NFC-module, at least some of these commands are stubbed in the Old3DS NFC-module(only returns an error).

"nfc:u" and "nfc:m" command set

There are at least two different revisions of the NFC module. First version was introduced on New3DS only with firmware 8.1.0-0_New3DS. Second version made its appearance with 9.3.0-X, on both Old3DS and New3DS.

These two versions are not interchangeable and not compatible, since the newer version uses a different command set and has no implemented commands from the older version. This does not introduce compatibility problems since no retail software used the NFC module, before the system titles added with 9.3.0-21 which use NFC.

9.3.0-X

Command Header	Available since system-version	Name	Input	Output	Notes
0x00010040		Initialize	u8 inputval	s32 result
0x00020040		Shutdown	u8 inputval	s32 result
0x00030000		StartCommunication	void	s32 result
0x00040000		StopCommunication	void	s32 result
0x00050040		StartTagScanning	u16 inval	s32 result
0x00060000		StopTagScanning	void	s32 result
0x00070000		LoadAmiiboData
0x00080000		ResetTagScanState
0x00090002		UpdateStoredAmiiboData
0x000A0000		???	void	s32 result
0x000B0000		GetTagInRangeEvent(?)	void	s32 result, u32 copy handle descriptor, Handle event	amiibo applet ignores value 'descriptor'. It doesn't even read it from the command buffer.
0x000C0000		GetTagOutOfRangeEvent(?)	void	s32 result, u32 copy handle descriptor, Handle event	amiibo applet also ignores value 'descriptor' for this command.
0x000D0000		GetTagState	void	s32 result, u8 outval
0x000F0000		CommunicationGetStatus
0x00100000		GetTagInfo2
0x00110000		GetTagInfo
0x00120000		CommunicationGetResult
0x00130040		OpenAppData
0x00140384		InitializeWriteAppData
0x00150040		ReadAppData
0x00160242		WriteAppData
0x00170000		GetRegisterInfo
0x00180000		GetCommonInfo
0x00190000		GetAppDataInitStruct
0x001A0000			None	No additional output.
0x001B0000		GetModelInfo
0x001C0040	9.6.0-X		u8 inputval	No additional output.	?
0x001D0040	9.6.0-X		u32 inputval	No additional output.	?
0x001E0040	9.6.0-X		u8 inputval	u8 outval at cmdreply[2].	?
0x001F0080	10.0.0-X	StartOtherTagScanning			Used by JPN eShop app "Megami Meguri".
0x00200102	10.0.0-X	SendTagCommand
0x00210000	10.0.0-X	?			Used by JPN eShop app "Megami Meguri". This can only be used when initialized with type3, and when the TagState is 3.
0x00220000	10.0.0-X	?			This can only be used when initialized with type3, and when the TagState is 3.

Pre-9.3.0-X

Pre-9.3.0-X command header	Command header starting with 9.3.0-X	Available since system-version	Description
0x00010000	?	8.1.0-0_New3DS	Initialize
0x00020000	?	8.1.0-0_New3DS	Shutdown
0x00030000	?	8.1.0-0_New3DS	GetNFCState. This writes an output u8 to cmdreply[2]: 0 = not initialized, 1 = just initialized, 5 = data transfer ready, ...
0x00040000	0x000B0000	8.1.0-0_New3DS	This writes an output handle to cmdreply[3].
0x00050000	0x000C0000	8.1.0-0_New3DS	This writes an output handle to cmdreply[3].
0x00060040	?	8.1.0-0_New3DS	(u8 input)
0x00070000	?	8.1.0-0_New3DS	The user process must setup the output-buffer hdr+ptr data @ TLS+0x180 when using this. cmdreply[2] = actual output data size?
0x00080100	?	8.1.0-0_New3DS	(<0x10-bytes starting at cmdreq[1]>)
0x00090000	?	8.1.0-0_New3DS
0x000A0000	?	8.1.0-0_New3DS	The user process must setup the output-buffer hdr+ptr data @ TLS+0x180 when using this.
0x000B0042	?	8.1.0-0_New3DS	(u32 size, ((Size<<14) | 2), inbufptr)
0x000C0044	?	8.1.0-0_New3DS	(u32 size, 0x20, <procid set by kernel>, ((Size<<14) | 0x402), inbufptr)
0x000D0040	?	8.1.0-0_New3DS	(u16 in)
0x000E0000	?	8.1.0-0_New3DS
0x000F00C2	?	8.1.0-0_New3DS	(u32 unk0, u32 unk1, u32 unk2, ((Size<<14) | 0x802), inbufptr)
0x00100040	?	8.1.0-0_New3DS	(u32 in)
0x00110040	?	8.1.0-0_New3DS	(u32 in)
0x00120040	?	8.1.0-0_New3DS	(u32 in)
0x00130000	?	8.1.0-0_New3DS	Writes an output u32 to cmdreply[2].
0x00140000	?	8.1.0-0_New3DS	This writes an output 0x30-byte struct starting at cmdreply[2].
0x00150000	0x00110000	8.1.0-0_New3DS	This writes an output 0x2C-byte struct starting at cmdreply[2].
0x00160000	?	8.1.0-0_New3DS
0x00170000	?	8.1.0-0_New3DS

NFC services error codes

Error-code	Description
0xc8a17600	The current NFC tag state, or other NFC state, is invalid with the NFC command which was used.

Data Types

AdminInfo

Offset	Size	Description
0x00	0x08	Program ID (From the Wii U, 3DS or Switch title who created the application area)
0x08	0x04	App ID
0x0C	0x02	CRC32 Change Counter
0x0E	0x01	Flags (bit0 = amiibo initialized, bit1 = has application area, bit2/bit3 unknown)
0x0F	0x01	Unknown, hardcoded to 0x2
0x10	0x1	0xFF if there is no application area, related to the console of the application area game otherwise (0/2 = 3DS, 1 = Wii U, 3 = Switch)
0x11	0x07	Padding
0x18	0x28	Reserved

RegisterInfo

Offset	Size	Description
0x00	0x60	Exported Mii Data (minus the AES-CCM used in the linked format)
0x60	0x16	Amiibo Name (NUL-Terminated)
0x76	0x01	Flags (bit0 = amiibo initialized, bit1 = has application area)
0x77	0x01	Font Region
0x78	0x04	Creation Date
0x7C	0x2C	Reserved

This data originates from the Amiibo settings data stored under the encrypted NFC data.

CommonInfo

Offset	Size	Description
0x00	0x04	Last Write Date
0x04	0x02	Write Counter
0x06	0x02	Character ID
0x08	0x01	Character Variant
0x09	0x01	Amiibo Series
0x0A	0x02	Model Number
0x0C	0x01	Amiibo Type
0x0D	0x01	Version
0x0E	0x02	Application Area Size (hardcoded to 0xD8)
0x10	0x30	Reserved

This data originates from the Amiibo NFC data.

ModelInfo

Offset	Size	Description
0x00	0x02	Character ID
0x02	0x01	Character Variant
0x03	0x01	Amiibo Series
0x04	0x02	Model Number
0x06	0x01	Amiibo Type
0x07	0x01	Version
0x08	0x2E	Reserved

This data originates from the Amiibo NFC data.

Date

Offset	Size	Description
0x00	0x02	Year
0x02	0x01	Month
0x03	0x01	Day

NFC module savedata

• "/nfp_backup.dat" This contains raw data from the Amiibo NFC data pages. The filesize is 0x001fbd20-bytes. Certain service cmds will trigger writing to this savedata. This entire file is read during amiibo Settings startup, it's unknown what command(s) actually triggers that. It seems the Amiibo data here is updated each time the Amiibo NFC data is updated, and read each time the Amiibo NFC data is read. Data is written into this savedata when the Amiibo was never scanned on this system before. The data here is probably also updated when the scanned Amiibo NFC data doesn't match the data stored here.

During NFC writing, the NFC data being written can become corrupted if the Amiibo figure is moved outside of range during writing. When this happens, this nfp_backup data can be used to restore a previous version of that data prior to the last failed write.

nfp_backup.dat structure

Offset	Size	Description
0x0	0x20	Header
0x20	0x800	Amiibo data table header
0x7D20	0x21C	The NFC data for the first stored Amiibo is located here. This is the entire raw data from all 0x87 NFC data pages.

Header structure

Offset	Size	Description
0x0	0x8	Unknown, normally the following data? "00 00 02 00 02 00 00 00" (as little-endian u32s: 0x20000, 0x2)
0x8	0x14	Unknown, normally all-zero?
0x1C	0x4	Unknown. CRC32 / checksum maybe?

Amiibo data table header

This is an array with 0x40(?) entries, where the size of each entry is 0x20-bytes. Entry structure:

Offset	Size	Description
0x0	0x8	First 8-bytes from Amiibo NFC serial-number.
0x8	0x3	Unknown, normally zero?
0xB	0x2	u16 little-endian date value for when this Amiibo was initially written into this savedata, with the same format from here.
0xD	0xF	Unknown, normally zero?
0x1C	0x4	Unknown. CRC32 / checksum maybe?

NFC module versions

System version	New3DS title-version	Old3DS title-version	Changes
9.6.0-X	v4102	v4106	New3DS and Old3DS: the only changes regarding new commands is that new commands were added for the nfcu/nfcm command-set and new commands for an unknown cmd-handler were added. It's unknown if there's other changes.

Errors

Error code	Description
0xC8A17600	This is returned when the current state is invalid for this command.
0xC8A17620	This is returned by NFC:OpenAppData when the appdata is uninitialized since NFC:InitializeWriteAppData wasn't used previously.
0xC8A17628	This is returned by NFC:GetAmiiboSettings when the amiibo wasn't setup by the amiibo Settings applet.
0xC8A17638	This is returned by NFC:OpenAppData when the input AppID doesn't match the actual Amiibo AppID.
0xC8C1760C	Returned for HMAC-hash mismatch(data corruption), with HMAC-calculation input_buffer_size=0x34.
0xC8A17618	HMAC-hash mismatch with input_buffer_size=0x1DF(see here).