Config Services
Config services
Command Header | Available since system version | Description |
---|---|---|
0x00010082 | GetConfigInfoBlk2 | |
0x00020000 | SecureInfoGetRegion | |
0x00030040 | GenHashConsoleUnique/GetTransferableId | |
0x00040000 | 3.0.0-5 | GetRegionCanadaUSA/IsCoppacsSupported |
0x00050000 | 5.0.0-11 | GetSystemModel |
0x00060000 | 6.0.0-11 | GetModelNintendo2DS |
0x00070040 | 7.0.0-13 | (u8 val) This writes the input u8 to the first byte in the config-block for blkID 0x00160000. |
0x00080080 | 7.0.0-13 | (u32 value, u8 type) This goes through a table containing 5 entries, each entry is 2-words. Type0: compare entry-word0 with input value, on match write entry-word1 to cmdreply+8 output. Type1: compare entry-word1 with input value, on match write entry-word0 to output. |
0x00090040 | 7.0.0-13 | GetCountryCodeString |
0x000A0040 | 7.0.0-13 | GetCountryCodeID |
0x000B0000 | 9.3.0-X | Unknown. Starting with 9.6.0-X this is hard-coded to write u8 value 0x1 to cmdreply[2](originally this checked various state/config for determining the output value). |
Config service "cfg:s"
Command Header | Available since system version | Description |
---|---|---|
0x04010082 | GetConfigInfoBlk8 | |
0x04020082 | SetConfigInfoBlk4 | |
0x04030000 | UpdateConfigNANDSavegame | |
0x04040042 | GetLocalFriendCodeSeedData | |
0x04050000 | GetLocalFriendCodeSeed | |
0x04060000 | SecureInfoGetRegion | |
0x04070000 | SecureInfoGetByte101 | |
0x04080042 | SecureInfoGetSerialNo | |
0x04090000 | UpdateConfigBlk00040003 | |
0x040A0000 | ? | ? |
0x040B0000 | ? | ? |
0x040C0000 | ? | ? |
0x040D0040 | ? | ? |
0x040E0000 | ? | ? |
0x040F0000 | ? | ? |
CfgS command 0x04060000(SecureInfoGetRegion) is used by NIM module to determine the SOAP RegionId, when sending SOAP requests. See here.
Config service "cfg:i"
Command Header | Description |
---|---|
0x04010082 | GetConfigInfoBlk8 |
0x04020082 | SetConfigInfoBlk4 |
0x04030000 | UpdateConfigNANDSavegame |
0x04040042 | GetLocalFriendCodeSeedData |
0x04050000 | GetLocalFriendCodeSeed |
0x04060000 | SecureInfoGetRegion |
0x04070000 | SecureInfoGetByte101 |
0x04080042 | SecureInfoGetSerialNo |
0x04090000 | UpdateConfigBlk00040003 |
0x08010082 | GetConfigInfoBlk8 |
0x08020082 | SetConfigInfoBlk4 |
0x08030000 | UpdateConfigNANDSavegame |
0x080400C2 | CreateConfigInfoBlk |
0x08050000 | DeleteConfigNANDSavefile |
0x08060000 | FormatConfig |
0x08070000 | This basically just returns result-code value 0x0, due to code this eventually executes being NOPed out. |
0x08080000 | This updates the config blocks for blkIDs 0x0 and 0x20000. In certain cases this may call the code for FormatConfig. |
0x08090000 | This updates the config block for blkID 0x60000. |
0x080A0000 | This updates the config block for blkID 0x00040001. |
0x080B0082 | SetGetLocalFriendCodeSeedData |
0x080C0042 | SetLocalFriendCodeSeedSignature |
0x080D0000 | DeleteCreateNANDLocalFriendCodeSeed |
0x080E0000 | VerifySigLocalFriendCodeSeed |
0x080F0042 | GetLocalFriendCodeSeedData |
0x08100000 | GetLocalFriendCodeSeed |
0x08110084 | SetSecureInfo |
0x08120000 | DeleteCreateNANDSecureInfo |
0x08130000 | VerifySigSecureInfo |
0x08140042 | SecureInfoGetData |
0x08150042 | SecureInfoGetSignature |
0x08160000 | SecureInfoGetRegion |
0x08170000 | SecureInfoGetByte101 |
0x08180042 | SecureInfoGetSerialNo |
Config service "cfg:u"
This only handles the commands listed under the above "Config services", no additional commands.
Config NVRAM service "cfg:nor"
Command Header | Description |
---|---|
0x00010040 | Initialize |
0x00020000 | Shutdown |
0x00050082 | ReadData |
0x00060082 | WriteData |
This is an interface for the "SPI::NOR" service, for accessing the Wifi NVRAM/SPI Flash.