Difference between revisions of "NFC Services"

From 3dbrew
Jump to navigation Jump to search
Line 116: Line 116:
  
 
==9.3.0-X==
 
==9.3.0-X==
−
Commands for >=9.3.0-X have been extracted by analyzing the amiibo Settings applet. Therefore this table may be missing commands. Note that the function name is actually a nickname for easeness of reading, as original function names have been stripped off the binaries.
 
−
 
−
See [[IPC Command Structure]] for an explanation on how IPC communication works and how to use these functions.
 
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
Line 270: Line 267:
 
| s32 result, u32 unknownA[8], u32 unknownB[4], u64 unknownC, u32 unknownD
 
| s32 result, u32 unknownA[8], u32 unknownB[4], u64 unknownC, u32 unknownD
 
| Apparently output is a struct
 
| Apparently output is a struct
 +
|-
 +
| 0x001A0000
 +
|
 +
| None
 +
| No additional output.
 +
|
 +
|-
 +
| 0x001B0000
 +
|
 +
| None
 +
| 0x36-byte output structure starting at cmdreply[2].
 +
|
 
|}
 
|}
  

Revision as of 03:30, 12 April 2015

The New3DS NFC module was added with 8.1.0-0_New3DS. The Old3DS NFC module was added with 9.3.0-X.

On New3DS NFC module uses the NFC hardware via the i2c::NFC and gpio:NFC services. On Old3DS NFC module communicates with a NFC peripheral via IR with the IRUSER service.

A total of 6 sessions can be open simultaneously for all of these services combined.

NFC services

NFC user service "nfc:u"

This is the NFC service used by regular applications.

This was first seen in the Super Smash Bros eShop demo (only in the exheader, the demo doesn't actually use it), but at that time no system-module was available for NFC on CDN. The first regular application to use this service was Super Smash Bros, with the v1.0.5 game-update, which used the new 9.3.0-21 command set.

NFC management service "nfc:m"

Command Header Available since system-version Name Input Output Notes
0x040100C2 Unknown, <9.3.0-X ??? u32 unknownA, u32 unknownB, u32 unknownC, u32 (sizeof(*buffer) << 14 | 0x402), void * buffer s32 result
0x04020000 9.3.0-X ??? void s32 result, u32 unknownA[16] Output seems to be a struct
0x04030000 9.3.0-X ??? void s32 result, u32 unknownA[41]
0x04040A40 9.3.0-X ??? u32 unknownA[41] s32 result
0x04060000 9.3.0-X ??? void s32 result
0x04070000 9.3.0-X ??? void s32 result, u32 unknownA
0x04080000 9.3.0-X ??? void s32 result, u32 unknownA
0x040D0000 9.3.0-X ??? void s32 result
0x040E0000 9.3.0-X ??? void s32 result, u32 unknownA, u32 unknownB Again, amiibo applet ignores value unknownA.
0x040F0000 9.3.0-X ??? void s32 result, u32 unknownA, u32 unknownB

This is used by the amiibo Settings applet. This service has the above commands, in addition to the command-set listed below.

NFC development service "nfc:dev"

This service seems to be intended for use only on dev-units(or at least some of the command(s)).

Unlike the New3DS NFC-module, at least some of these commands are stubbed in the Old3DS NFC-module(only returns an error).

NFC service "nfc:p"

This service is used by the mint library-applet, starting with 9.3.0-21. This service was added to the mint service-access-control list with 9.0.0-20.

NFC service "nfc:r"

This service has no known use.

NFC service "nfc:s"

This service has no known use.

Unlike the New3DS NFC-module, at least some of these commands are stubbed in the Old3DS NFC-module(only returns an error).

"nfc:u" and "nfc:m" command set

There are at least two different revisions of the NFC module. First version was introduced on New3DS only with firmware 8.1.0-0_New3DS. Second version made its appearance with 9.3.0-X, on both Old3DS and New3DS.

These two versions are not interchangeable and not compatible, since the newer version uses a different command set and has no implemented commands from the older version. This does not introduce compatibility problems since no retail software used the NFC module before the Super Smash Bros for 3DS, whose NFC update required 9.3.0-21.

9.3.0-X

Command Header Name Input Output Notes
0x00010040 nfcInit u8 unknownA s32 result
0x00020040 nfcStop u8 unknownA s32 result
0x00030000 ??? void s32 result
0x00040000 ??? void s32 result
0x00050040 ??? u16 unknownA s32 result
0x00060000 ??? void s32 result
0x00070000 ??? void s32 result
0x00080000 ??? void s32 result
0x00090002 ??? u32 pid, u32 pidPlaceholder s32 result
0x000A0000 ??? void s32 result
0x000B0000 ??? void s32 result, u32 unknownA, u32 unknownB amiibo applet ignores value unknownA. It doesn't even read it from the command buffer.
0x000C0000 ??? void s32 result, u32 unknownA, u32 unknownB amiibo applet also ignores value unknownA for this command.
0x000D0000 ??? void s32 result, u8 unknownA
0x000F0000 ??? void u32 result, u32 unknownA
0x00100000 ??? void s32 result, u32 unknownA[24]
0x00110000 ??? void s32 result, u32 unknownA[8], u32 unknownB[2], u32 unknownC
0x00120000 ??? void s32 result, u32 unknownA
0x00130040 ??? u32 unknownA s32 result
0x00140384 ??? u32 unknownA, u32 unknownB, u8 unknownB[48], u32 pid, u32 pidPlaceholder, u32 (buffer_size << 14) | 0x00000002, void * buffer s32 result See IPC parameter type 1 for explanation on buffer
0x00150040 ??? u32 unknownA s32 result Uses something at TLS+0x180
0x00160242 ??? u32 unknownA, u8 unknownB[32], u32 (buffer_size << 14) | 0x00000002, void * buffer s32 result
0x00170000 ??? void s32 result, u32 unknownA[42]
0x00180000 ??? void s32 result, u32 unknownA[16]
0x00190000 ??? void s32 result, u32 unknownA[8], u32 unknownB[4], u64 unknownC, u32 unknownD Apparently output is a struct
0x001A0000 None No additional output.
0x001B0000 None 0x36-byte output structure starting at cmdreply[2].

Pre-9.3.0-21

Command Header Available since system-version Description
0x00010000 8.1.0-0_New3DS Initialize
0x00020000 8.1.0-0_New3DS Shutdown
0x00030000 8.1.0-0_New3DS GetNFCState. This writes an output u8 to cmdreply[2]: 0 = not initialized, 1 = just initialized, 5 = data transfer ready, ...
0x00040000 8.1.0-0_New3DS This writes an output handle to cmdreply[3].
0x00050000 8.1.0-0_New3DS This writes an output handle to cmdreply[3].
0x00060040 8.1.0-0_New3DS (u8 input)
0x00070000 8.1.0-0_New3DS The user process must setup the output-buffer hdr+ptr data @ TLS+0x180 when using this. cmdreply[2] = actual output data size?
0x00080100 8.1.0-0_New3DS (<0x10-bytes starting at cmdreq[1]>)
0x00090000 8.1.0-0_New3DS
0x000A0000 8.1.0-0_New3DS The user process must setup the output-buffer hdr+ptr data @ TLS+0x180 when using this.
0x000B0042 8.1.0-0_New3DS (u32 size, ((Size<<14) | 2), inbufptr)
0x000C0044 8.1.0-0_New3DS (u32 size, 0x20, <procid set by kernel>, ((Size<<14) | 0x402), inbufptr)
0x000D0040 8.1.0-0_New3DS (u16 in)
0x000E0000 8.1.0-0_New3DS
0x000F00C2 8.1.0-0_New3DS (u32 unk0, u32 unk1, u32 unk2, ((Size<<14) | 0x802), inbufptr)
0x00100040 8.1.0-0_New3DS (u32 in)
0x00110040 8.1.0-0_New3DS (u32 in)
0x00120040 8.1.0-0_New3DS (u32 in)
0x00130000 8.1.0-0_New3DS Writes an output u32 to cmdreply[2].
0x00140000 8.1.0-0_New3DS This writes an output 0x30-byte struct starting at cmdreply[2].
0x00150000 8.1.0-0_New3DS This writes an output 0x2C-byte struct starting at cmdreply[2].
0x00160000 8.1.0-0_New3DS
0x00170000 8.1.0-0_New3DS

NFC module savedata

  • "/nfp_backup.dat" Going by the filename this seems to contain data backed up from amiibo.
Retrieved from "https://www.3dbrew.org/w/index.php?title=NFC_Services&oldid=12283"