NCCH/Extended Header

Overview

This page documents the format of the NCCH Extended Header (exheader for short).

The exheader, has two sections:

• The actual exheader data, containing System Control Info and Access Control Info,
• And a signed copy of NCCH HDR public key, and exheader Access Control Info. (This version of the Access Control Info is used as limitation to the actual Access Control Info)

Main Structure

All values are little endian unless otherwise specified.

Offset	Size	Description
0x0	0x200	System Control Info
0x200	0x200	Access Control Info
0x400	0x100	AccessDesc Signature (RSA-2048-SHA256)
0x500	0x100	NCCH Hdr RSA-2048 Public Key
0x600	0x200	Access Control Info (For limitation of first Access Control Info)

The AccessDesc Signature covers the NCCH Hdr Public Key and second Access Control Info. The AccessDesc public key is initialised by the bootrom.

When loading the exheader, Process9 compares the exheader data with the data in the accessdesc(note that not everything is compared here). When these don't match, an error is returned. The Process9 code handling this validation was updated with v6.0(the only change in this function seems to be the check for the "Ideal Processor" field).

System Control Info

Offset	Size	Description
0x0	0x8	Application Title
0x8	0x5	Reserved
0xD	0x1	Flag (Bit0: CompressExefsCode, Bit1: SDApplication)
0xE	0x2	Remaster Version
0x10	0xC	Text Code Set Info
0x1C	0x4	Stack Size
0x20	0xC	ReadOnly Code Set Info
0x2C	0x4	Reserved
0x30	0xC	Data Code Set Info
0x3C	0x4	BSS Size
0x40	0x180 (48*8)	Dependency Module (Program ID) List
0x1C0	0x40	SystemInfo

Code Set Info

Offset	Size	Description
0x0	0x4	Address
0x4	0x4	Physical region size (in page-multiples)
0x8	0x4	Size (in bytes)

System Info

Offset	Size	Description
0x0	0x8	SaveData Size
0x8	0x8	Jump ID
0x10	0x30	Reserved

Access Control Info

Offset	Size	Description
0x0	0x170	ARM11 Local System Capabilities
0x170	0x80	ARM11 Kernel Capabilities
0x1F0	0x10	ARM9 Access Control

ARM11 Local System Capabilities

Offset	Size	Description
0x0	0x8	Program ID
0x8	0x4	Core Version (The Title ID low of the required FIRM)
0xC	0x2	Flag1 and Flag2
0xE	0x1	Flag0
0xF	0x1	Priority
0x10	0x20 (16*2)	Resource Limit Descriptors
0x30	0x20	Storage Info
0x50	0x100 (32*8)	Service Access Control
0x150	0x10 (2*8)	Extended Service Access Control, support for this was implemented with 9.3.0-X.
0x160	0xF	Reserved
0x16F	0x1	Resource Limit Category. (0 = APPLICATION, 1 = SYS_APPLET, 2 = LIB_APPLET, 3 = OTHER)

Flag0

This stores the System Mode, Affinity Mask and Ideal Processor values in one byte. They are stored as follows:

u8 Flag0 = (SystemMode << 4 | AffinityMask << 2 | IdealProcessor);

And can be retrieved as follows:

u8 SystemMode = (Flag0>>4)&0xF;
u8 AffinityMask = (Flag0>>2)&0x3;
u8 IdealProcessor = (Flag0>>0)&0x3;

In the exheader data, the IdealProcessor field is a bit-index, while in the accessdesc the IdealProcessor field is a bitmask. When the bit specified by the exheader field is not set in the accessdesc field, an error is returned. "if((1<<exheaderval) & accessdescval == 0)return error"

During a FIRM-launch when a titleinfo structure was specified, the field at offset 0x400 in the FIRM-launch parameters is set to the SystemMode of the specified title(however in some cases other values are written there). With 8.0.0-18 NS will now check the output of PTMSYSM command 0x040A0000, when the output is non-zero and a certain NS state field is value-zero, the following is executed otherwise this is skipped. With that check passed on 8.0.0-18, NS will then check (Flag2 & 0xf). When that's value2, the output value(used for the FIRM-launcher parameter field mentioned above) is set to value7. Otherwise, when that value is non-zero, the output value is set to 6.

Flag1 and Flag2

Support for these two u8 fields were implemented with 8.0.0-18.

Flag1

Bit	Description
0	Unknown.
1	Unknown.
2-7	Unused

In order for the exheader to have any of the above new bits set, the accessdesc must have the corresponding bit set, otherwise the invalid-exheader error is returned.

Flag2

Bit	Description
0-3	?
4-7	Unused

The exheader value for the above 4-bit value must be <= to the accessdesc value, otherwise the invalid-exheader error is returned.

Storage Info

Offset	Size	Description
0x0	0x8	Extdata ID
0x8	0x8	System Save Data Ids
0x10	0x8	Storage Accessable Unique Ids
0x18	0x7	File System Access Info
0x1F	0x1	Other Attributes

File System Access Info:

Bit and bitmask	Description
0, 0x1	Category System Application
1, 0x2	Category Hardware Check
2, 0x4	Category File System Tool
3, 0x8	Debug
4, 0x10	TWL Card Backup
5, 0x20	TWL Nand Data
6, 0x40	BOSS
7, 0x80	sdmc:/
8, 0x100	Core
9, 0x200	nand:/ro/ (Read Only)
10, 0x400	nand:/rw/
11, 0x800	nand:/ro/ (Write Access)
12, 0x1000	Category System Settings
13, 0x2000	Card Board
14, 0x4000	Export Import IVS
15, 0x8000	sdmc:/ (Write-only)
16, 0x10000	Switch Cleanup (Introduced in 3.0.0?)
17, 0x20000	Save Data Move (Introduced in 5.0.0)
18, 0x40000	Shop (Introduced in 5.0.0)
19, 0x80000	Shell (Introduced in 5.0.0)
20, 0x100000	Category HomeMenu (Introduced in 6.0.0)
21, 0x200000	Unknown. Introduced in 9.6.0-X FIRM. Home Menu has this bit set starting with 9.6.0-X.

Other Attributes:

Bit	Description
0	Not use RomFS
1	Use Extended Save Data Access. When this is set, the Extdata ID and Storage Accessable Unique Ids regions are used to store a total of 6 Accessible Save Ids. Introduced in 6.0.0.

Service Access Control

This is the list of services which the process is allowed to access, this is registered with the services manager. Each service listed in the exheader must be listed in the accessdesc, otherwise the invalid exheader error is returned. The order of the services for exheader/accessdesc doesn't matter. The accessdesc can list services which are not in the exheader, but normally the service-access-control data for exheader/accessdesc are exactly the same.

ARM11 Kernel Capabilities

Offset	Size	Description
0x0	0x70 (28*4)	Descriptors
0x70	0x10	Reserved

ARM9 Access Control

Offset	Size	Description
0x0	0xF	Descriptors
0xF	0x1	ARM9 Descriptor Version. Originally this value had to be >=2. Starting with 9.3.0-X this value has to be either value 2 or value 3.

Descriptors:

Bit	Description
0	Mount nand:/
1	Mount nand:/ro/ (Write Access)
2	Mount twln:/
3	Mount wnand:/
4	Mount Card SPI
5	Use SDIF3
6	Create Seed
7	Use Card SPI
8	SD Application (Not checked)
9	Mount sdmc:/ (Write Access)