Request[edit]
| Index Word
|
Description
|
| 0
|
Header code [0x000B0000]
|
Response[edit]
| Index Word
|
Description
|
| 0
|
Header code
|
| 1
|
Result code
|
| 2-13
|
Output 0x30-byte structure.
|
Output structure[edit]
| Offset
|
Size
|
Description
|
| 0x0
|
0x4
|
u32 status
|
| 0x4
|
0x4
|
Unknown u32. Official user-processes check for values: 0x0, 0x1, and non-zero.
|
| 0x8
|
0x2
|
u16 NetworkNodeID for this device. This is the broadcast alias when connected as a spectator.
|
| 0xA
|
0x2
|
u16, changed_nodes. This is a bitmask of the nodes that changed and triggered the update.
|
| 0xC
|
0x20
|
u16 nodes[16]. Array of NetworkNodeIds, the values inside this array is what's passed to NWMUDS:GetNodeInformation.
|
| 0x2C
|
0x1
|
u8 total_nodes.
|
| 0x2D
|
0x1
|
u8 max_nodes, originally from the NetworkStruct.
|
| 0x2E
|
0x2
|
u16 node_bitmask. This is a bitmask of NetworkNodeIDs: bit0 for NetworkNodeID 0x1(host), bit1 for NetworkNodeID 0x2(first original client), and so on.
|
Right after initializing, this structure is all-zero except for the status which is value 0x3.
Status values[edit]
| Type
|
Description
|
| 0x3
|
Not connected to any network as a host/client, or just initialized.
|
| 0x6
|
Connected to a network as a host.
|
| 0x9
|
Connected to a network as a client.
|
| 0xA
|
Connected to a network as a spectator.
|
| 0xB
|
For this value official user-processes use NWMUDS:UpdateNetworkAttribute to clear attributes bitmask 0x6.
|
Description[edit]
This is mainly used when the event handle from NWMUDS:Initialize is signaled. This is also used before using NWMUDS:Bind. For certain user-processes this may be used during NWMUDS initialization as well.
The event is not signaled when using NWMUDS:DestroyNetwork or NWMUDS:DisconnectNetwork. However the event does get signaled when creating or connecting to a network.