CONFIG9 Registers

Revision as of 17:51, 5 January 2017 by Plutooo (talk | contribs)

Registers

Old3DS Name Address Width Used by
Yes CFG_SYSPROT9 0x10000000 1 Boot9
Yes CFG_SYSPROT11 0x10000001 1 Boot9
Yes CFG_RST11 0x10000002 1 Boot9
Yes CFG_DEBUGCTL 0x10000004 4
Yes ? 0x10000008 1 Boot9, Process9, TwlProcess9
Yes CFG_CARDCTL 0x1000000C 2 Process9
Yes CFG_CARDSTATUS 0x10000010 1 Process9
Yes CFG_CARDCYCLES0 0x10000012 2 Boot9, Process9
Yes CFG_CARDCYCLES1 0x10000014 2 Boot9, Process9
Yes ? 0x10000020 2
Yes ? 0x10000100 2
No CFG_EXTMEMCNT9 0x10000200 1 NewKernel9
Yes CFG_MPCORECFG 0x10000FFC 4
Yes CFG_BOOTENV 0x10010000 4
Yes CFG_UNITINFO 0x10010010 1 Process9
Yes CFG_TWLUNITINFO 0x10010014 1 Process9

CFG_SYSPROT9

CFG_SYSPROT9 is used to permanently disable certain security-sensitive ARM9 memory areas until the next hard reset.

Bit Description Used by
0 Disables ARM9 bootrom(+0x8000) when set to 1. Cannot be cleared to 0 once set to 1. Boot9
1 Disables OTP area when set to 1. Cannot be cleared to 0 once set to 1. NewKernel9Loader, Process9
31-2 Not used

On Old 3DS, NATIVE_FIRM reads CFG_SYSPROT9 to know whether it has previously initialized the TWL console-unique keys using the OTP data. After setting the TWL console-unique keys, NATIVE_FIRM sets CFG_SYSPROT9 bit 1 to disable the OTP area. In subsequent FIRM launches prior to the next reset, NATIVE_FIRM will see that the OTP area is disabled, and skip this step.

On New 3DS, the above is instead done by the Kernel9 loader. In addition to using the OTP data for initializing the TWL console-unique keys, the Kernel9 loader will generate the decryption key for NATIVE_FIRM. The final keyslot for NATIVE_FIRM is preserved, so that at a non-reset FIRM launch, the keyslot can be reused, since the OTP would then be inaccessible.

CFG_SYSPROT11

Bit Description Used by
0 Disables ARM11 bootrom(+0x8000) when set to 1. Cannot be cleared to 0 once set to 1. Boot9
31-1 Not used

CFG_RST11

Bit Description Used by
0 Presumably takes ARM11 out of reset. Cannot be set to 1 once it has been cleared. Boot9
31-1 Not used

0x10000008

Bit Description Used by
1-0 ?
3-2 AES related? Value 3 written after write to AES_CTL. Boot9, Process9, TwlProcess9
31-4 Reserved

CFG_CARDCTL

Bit Description Used by
1-0 Gamecard active controller select (0=NTRCARD, 1=?, 2=CTRCARD0, 3=CTRCARD1) Process9
8 Enable gamecard eject IRQ, maybe? Process9

Depending on the gamecard controller that has been selected, one of the following gamecard registers will become active:

  • Selecting NTRCARD will activate the register space at 0x10164000.
  • Selecting CTRCARD0 will activate the register space at 0x10004000.
  • Selecting CTRCARD1 will activate the register space at 0x10005000.

CFG_CARDSTATUS

Bit Description Used by
0 Cartridge-slot empty (0=inserted, 1=empty) Process9
3-2 ? Process9

CFG_EXTMEMCNT9

This register is New3DS-only.

Bit Description Used by
0 Hide extended ARM9 memory (0=hidden, 1=shown) Kernel9 (New3DS)
31-1 Reserved

CFG_MPCORECFG

Identical to PDN_MPCORE_CFG.

CFG_BOOTENV

This register is used to determine what the previous running FIRM was. Its value is kept following an MCU reboot. Its initial value (on a cold boot) is 0. NATIVE_FIRM sets it to 1 on shutdown/FIRM launch. LGY FIRM writes value 3 here when launching a TWL title, and writes value 7 when launching an AGB title.

NATIVE_FIRM will only launch titles if this is not value 0, and will only save the AGB_FIRM savegame to SD if this is value 7.

CFG_UNITINFO

This 8-bit register is value zero for retail, non-zero for dev/debug units.

CFG_TWLUNITINFO

In the console-unique TWL key-init/etc function the ARM9 copies the u8 value from REG_UNITINFO to this register.

This is also used by TWL_FIRM Process9.