NWMUDS:GetConnectionStatus
Request
| Index Word | Description |
|---|---|
| 0 | Header code [0x000B0000] |
Response
| Index Word | Description |
|---|---|
| 0 | Header code |
| 1 | Result code |
| 2-13 | Output 0x30-byte structure. |
Output structure
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | u32 status |
| 0x4 | 0x4 | Unknown u32. Official user-processes check for values: 0x0, 0x1, and non-zero. |
| 0x8 | 0x2 | u16 NetworkNodeID for this device. |
| 0xA | 0x22 | ? |
| 0x2C | 0x1 | u8 total_nodes. |
| 0x2D | 0x1 | u8 max_nodes, originally from the NetworkStruct. |
| 0x2E | 0x2 | u16 node_bitmask. This is a bitmask of NetworkNodeIDs: bit0 for NetworkNodeID 0x1(host), bit1 for NetworkNodeID 0x2(first original client), and so on. |
Status values
| Type | Description |
|---|---|
| 0x3 | Not connected to any network as a host/client. |
| 0x6 | Connected to a network as a host. |
| 0x9 | Connected to a network as a client. |
| 0xA | Connected to a network as a spectator. |
| 0xB | For this value official user-processes use NWMUDS:UpdateNetworkAttribute to clear attributes bitmask 0x6. |
Description
This is mainly used when the event handle from NWMUDS:Initialize is signalled. This is also used before using NWMUDS:Bind. For certain user-processes this may be used during NWMUDS initialization as well.
The event is not signalled when using NWMUDS:DestroyNetwork or NWMUDS:DisconnectNetwork. However the event does get signalled when creating or connecting to a network.