Difference between revisions of "CONFIG9 Registers"
Jump to navigation
Jump to search
| Line 56: | Line 56: | ||
== 0x10010000 == | == 0x10010000 == | ||
| − | NATIVE_FIRM writes value 1 here when a FIRM launch begins. | + | Initially this is value zero. NATIVE_FIRM writes value 1 here when a FIRM launch begins. The [[Legacy_FIRM_PXI|LGY]] FIRM writes value 3 here when handling PXI command 0x00020080(first TWL PXI command), it also writes value 7 here when handling PXI command 0x00030080(first AGB PXI command). This register can be read to determine what "mode" the system is running under: hard-boot, FIRM launch, or TWL/AGB FIRM. |
== REG_UNITINFO == | == REG_UNITINFO == | ||
This 8-bit register is value zero for retail, non-zero for dev/debug units. | This 8-bit register is value zero for retail, non-zero for dev/debug units. | ||
Revision as of 07:54, 15 February 2014
Registers
| NAME | PHYSICAL ADDRESS | WIDTH |
|---|---|---|
| ? | 0x10000000 | 1 |
| ? | 0x10000001 | 1 |
| ? | 0x10000004 | 4 |
| REG_CARDCONF | 0x1000000C | 2 |
| ? | 0x10000010 | 1 |
| ? | 0x10010000 | 4 |
| REG_UNITINFO | 0x10010010 | 1 |
REG_CARDCONF
| Bit | Description |
|---|---|
| 1-0 | Gamecard active controller select (0=NTRCARD, 1=?, 2=CTRCARD1, 3=CTRCARD2) |
| 8 | ? |
Depending on the gamecard controller that has been selected, one of the following gamecard registers will become active:
- Selecting NTRCARD will activate the register space at 0x10164000.
- Selecting CTRCARD1 will activate the register space at 0x10004000.
- Selecting CTRCARD2 will activate the register space at 0x10005000.
Hidden bootrom off-switch
ARM9 bootrom 0xFFFF8000+ is disabled by writing 1 to (u8*)0x10000000 and 1 to (u8*)0x10000001?
0x10010000
Initially this is value zero. NATIVE_FIRM writes value 1 here when a FIRM launch begins. The LGY FIRM writes value 3 here when handling PXI command 0x00020080(first TWL PXI command), it also writes value 7 here when handling PXI command 0x00030080(first AGB PXI command). This register can be read to determine what "mode" the system is running under: hard-boot, FIRM launch, or TWL/AGB FIRM.
REG_UNITINFO
This 8-bit register is value zero for retail, non-zero for dev/debug units.