IPC

The 3DS software stack follows a server/client architecture, where common functionality is provided by global server processes through interfaces called ports and services. Applications can access this functionality by creating sessions to the provided services. Technically, this is implemented using interprocess communication (IPC).

Concepts

Sessions

Sessions are communication channels consisting of a client and server, through which data can be exchanged in the form of a request and response, respectively. Through sessions, the standard IPC command protocol is implemented. Clients use their client session handle to send IPC commands to the server using svcSendSyncRequest, while servers use svcReplyAndReceive to reply. In both cases, the kernel takes care of transferring IPC command data from the Thread Local Storage of the sending thread to the TLS of the receiving thread. Sessions can be created through svcCreateSession, which provides the caller with the client and server handles.

Sessions are used in their raw form to implement file handles. In this case, fs-module creates a raw session using svcCreateSession, and provides the "fs:USER" client with the resulting client session handle, keeping the server session handle for its own use. These sessions expose their own set of IPC commands which act on the file that was opened through fs:USER.

Ports

Ports are interfaces for managing multiple client sessions to the same high-level server. Ports are created through svcCreatePort, and can be global or private. A global port is created by passing a name for the port to svcCreatePort. Clients can start IPC sessions to global ports by connecting to the port using svcConnectToPort, passing the desired port name. If the port is private, it is not possible to create a session through svcConnectToPort - sessions can only be created if one has a handle to the port itself, obtained from the call to svcCreatePort. When a client wishes to connect to a port (i.e. create a session), the server must accept the new session using svcAcceptSession. The kernel notifies the server whenever a new session is incoming via the server's port handle. The server can wait for this notification through svcWaitSynchronization or svcReplyAndReceive.

The two global ports usually found on retail are "srv:" (service manager) and "err:f" (ErrDisp).

Services

Services are an abstraction of ports that are managed by service manager. Services cannot be connected to through svcConnectToPort, as the underlying port is a private port. The service name is instead entirely handled by service manager, and the kernel is not aware of it. Clients are instead expected to open a session to a service using the "srv:" port command GetServiceHandle. The client process must pass an access permission check for each service (by name) that it attempts to request a session with. These permissions are granted in the "service access control" of the title's extended header. A service is registered with service manager using the command RegisterService.

Internally, service manager creates services by creating a private port which it associates with the desired service name. The resulting server port handle is returned in the RegisterService response, for the server's own use (see ports). To create sessions to a service on behalf of a client, service manager uses svcCreateSessionToPort, passing the client port handle it obtained when creating the port, to the kernel. Service manager then returns the resulting session handle to the client in the GetServiceHandle response.

The majority of 3DS inter-process communication is implemented as services.

Shared Memory

Communication through port/service requests and replies may incur a big bottleneck when exchanging large amounts of data because the kernel needs to transfer the data between the two involved processes. There is hence a complementary feature to share the same physical memory between two processes. For this purpose, one process needs to create a block of shared memory using svcCreateMemoryBlock such that the other process can map it into its own virtual memory address space using svcMapMemoryBlock. The memory block handle for the latter is provided using a regular IPC command.

Many services use shared memory as a secondary command interface (e.g. GSP), the processing of which is triggered through an IPC request (cf. GSPGPU:TriggerCmdReqQueue).

Message Structure

IPC requests are written to the Thread Local Storage at offset 0x80 and submitted using svcSendSyncRequest. If the kernel was able to dispatch the request, the server reply will be written to TLS+0x80 before svcSendSyncRequest returns. By convention, the second word of the response data is an error code (or 0 on success). IPC requests and IPC replies follow the same structure.

Every IPC message starts with a u32 header code. Parameters (if any) are written following this header. There are "normal parameters", which are fixed-size words, and there are "translate parameters", which are of flexible size and each of which begins with a header. The entire command has the following structure:

Word	Size	Description
0	1	Header code
1	x	Normal parameters
1+x	y	Translate parameters

The IPC message header has the following structure:

Bits	Description
0-5	Total size in words of the translate parameters (=y). Note that this is in general different from the number of translate parameters
6-11	Number of normal parameters (=x)
12-15	Unused
16-31	Command ID

When calling svcSendSyncRequest, the command id specifies a function specific to the target service to call. When calling svcReplyAndReceive, the command ID is generally ignored. However if it's 0xffff (and 0 is passed for the reply target handle), the kernel will omit the IPC reply and just wait for incoming IPC requests.

Each translate parameter starts with a translation descriptor:

Bits	Description
1-3	Translation type

Translate parameters are modified/translated transparently by the kernel. They are used to transfer handles/buffers between the different processes.

The type of parameter is described by the bits 1-3 in the translation descriptor. Parameter types accepted for sending by the kernel are: 0, 1, 2, 5, 6, 7.

For replies, only 0, 1, 5, 6, 7 are allowed. In other words any type 2 fields must be zeroed before calling svcReplyAndReceive on the server-side. For replies, type 0, 1, and 2 are ignored. Types 5, 6, and 7 do something with the mem pointer upon reply. The type 0 descriptor can be used to ignore parameters. The number of parameters covered by a type-0 descriptor is (desc >> 26) + 1.

Handle Translation

Translation type 0 is used to send handles across processes. The corresponding translation descriptor has the following structure:

Bits	Description
4	If set, the handles are closed for the caller. Interaction with bit5 unknown.
5	If set, the following handles are replaced by the process ID. Otherwise, translate each handle between client and server.
26-31	Number of handles following this descriptor (minus one).

Usage examples:

Usual form	Description
0x00000000 | ((num_handles-1)<<26) <handle 0> <handle 1> ...	Copies the given KHandles to the receiving process, i.e. creating new handles in the target process while keeping around the ones of the source process. When a handle value is 0x0, value 0x0 is written to the destination cmdbuf without doing any actual handle-transfer.
0x00000010 | ((num_handles-1)<<26) <handle 0> <handle 1> ...	Moves the given KHandles to the receiving process, i.e. creating new handles in the target process and closing the ones of the source process. When a handle value is 0x0, value 0x0 is written to the destination cmdbuf without doing any actual handle-transfer.
0x00000020 <placeholder>	Let kernel set value to calling process ProcessID.

Static Buffer Translation

Each thread may set up up to 16 static buffer descriptors in their Thread Local Storage at offset 0x180. These contain information about buffers in the thread's memory space that may be used for information exchange for communication with other processes. In particular, a static buffer descriptor encodes the address and size of a buffer.

Using IPC requests, data can be transferred from any location in the source process to one of the static buffers set up in the target process. This is done using a translation descriptor of type 1, which is followed by a pointer to the source data. The translation descriptor has the following structure:

Bits	Description
1-3	Translation type (characteristically 1)
10-13	Static buffer index of the receiving process
14-??	Size in bytes of the transferred data. Specifying an amount larger than the target static buffer will result in an error.

When encountering such a translation descriptor, the kernel will look up the static buffer address and size corresponding to the given index and (if the buffer can hold the requested amount of data) will copy the data to the specified location.

Note that the translation descriptor and static buffer descriptor share the same layout. However, it is unknown whether the kernel ever reads fields other than the buffer address and size when dealing with static buffer descriptors.

Usage examples:

Usual form	Description
0x00000002 | (size<<14) | (static_buffer_id<<10) <ptr>	The corresponding value contains a ptr to a buffer of said size, that should be copied to an already set-up buffer in destination process at Thread Local Storage offset 0x180 + static_buffer_id*8. The static_buffer_id is only 4 bits, making it possible for at most up to 16 buffers in total per thread.

Buffer Mapping Translation

The IPC subsystem can temporarily map a whole buffer of the sender's memory into the receiver's memory space. This is useful for large buffers, for which the overhead of copying static buffer data around would be too expensive.

This kind of translation is enabled by setting bit3 in the translation descriptor. The other two bits of what's documented as the translation type above are used to specify buffer access permissions of the receiving process.

Buffers will get mapped at virtual address 0x04000000+ in the destination process. When this translation descriptor is submitted to the kernel through svcReplyAndReceive, the given buffer will be unmapped from the sending process.

Bits	Description
1-2	Access permission flags for the receiving process: 1=read-only, 2=write-only, 3=read-write. Specifying 0 will cause a kernel panic.
3	Characteristically 1 for this translation type.
4-??	Size in bytes of the shared memory block.

Usage examples:

Usual form	Description
0x00000008	This command will cause a kernel panic.
0x0000000A | (size<<4) <ptr>	The corresponding value contains a ptr to a buffer of said size. It is mapped read-only in the destination process.
0x0000000C | (size<<4) <ptr>	The corresponding value contains a ptr to a buffer of said size. It is mapped write-only in the destination process.
0x0000000E | (size<<4) <ptr>	The corresponding value contains a ptr to a buffer of said size. It is mapped read-write in the destination process.

Usage Examples for other Translation Types

Type	Usual form	Description
2	0x00000004 | (size<<8) | (id<<4) <ptr>	This is used for RW buffers over PXI. The address written to the destination cmd-buf is a phys-addr for a table located in the BASE memregion. This table contains the phys-addrs for the actual data, the array entries have the following format: {u32 *datachunk_physaddr, u32 datachunk_bytesize}.
3	0x00000006 | (size<<8) | (id<<4) <ptr>	Same as above except for read-only buffer.