* 2 Seconds - bootrom attempts to initialize the NAND. If the NAND is successfully initialized, the bootrom loads the firmware stored in the NAND [[FIRM]] partition which handles booting the rest of the system. The ARM11 kernel loaded from FIRM then launches the [[NCCH#CXI|CXI]] ARM11 system modules loaded from FIRM.(Note that the ARM11 kernel does not handle any encryption/RSA verification, this is handled by the [[FIRM|ARM9]]) If the NAND cannot be initialized, (i.e. the NAND chip is not connected/damaged etc) a blue error screen similar to the screen above appears. | * 2 Seconds - bootrom attempts to initialize the NAND. If the NAND is successfully initialized, the bootrom loads the firmware stored in the NAND [[FIRM]] partition which handles booting the rest of the system. The ARM11 kernel loaded from FIRM then launches the [[NCCH#CXI|CXI]] ARM11 system modules loaded from FIRM.(Note that the ARM11 kernel does not handle any encryption/RSA verification, this is handled by the [[FIRM|ARM9]]) If the NAND cannot be initialized, (i.e. the NAND chip is not connected/damaged etc) a blue error screen similar to the screen above appears. |