There are 3 address registers: a0.x, a0.y and aL (loop counter). For format 1 instructions, when IDX != 0, the value of the corresponding address register is added to SRC1's value. For example, if IDX = 2, a0.y = 3 and SRC1 = c8, then instead SRC1+a0.y = c11 will be used for the instruction. It is only possible to use address registers on constant registers, attempting to use them on input attribute or temporary registers results in the address register being ignored (i.e. read as zero). | There are 3 address registers: a0.x, a0.y and aL (loop counter). For format 1 instructions, when IDX != 0, the value of the corresponding address register is added to SRC1's value. For example, if IDX = 2, a0.y = 3 and SRC1 = c8, then instead SRC1+a0.y = c11 will be used for the instruction. It is only possible to use address registers on constant registers, attempting to use them on input attribute or temporary registers results in the address register being ignored (i.e. read as zero). |