Line 253: |
Line 253: |
| | 0x02 | | | 0x02 |
| | d | | | d |
− | | wo | + | | rw |
| | 2bit value, writing will mask away/"acknowledge" the event, set to 3 by mcuMainLoop on reset if reset source is Watchdog | | | 2bit value, writing will mask away/"acknowledge" the event, set to 3 by mcuMainLoop on reset if reset source is Watchdog |
| bit0: RTC clock value got reset to defaults | | bit0: RTC clock value got reset to defaults |
Line 528: |
Line 528: |
| | 0x3D | | | 0x3D |
| 0x3E | | 0x3E |
− | | s (2) | + | | s |
| | ro | | | ro |
− | | RTC tick counter (resets to 0 when the seconds increase) | + | | RTC tick counter / "ITMC" (when resets to 0 the seconds increase) |
| + | Only reading 0x3D will update the in-RAM value |
| |- | | |- |
| | 0x3F | | | 0x3F |
Line 597: |
Line 598: |
| |- | | |- |
| | 0x4C | | | 0x4C |
− | 0x4E | + | 0x4D |
− | | s | + | | ?? |
| + | | ?? |
| + | | ?? |
| + | |- |
| + | | 0x4E |
| + | | d |
| | rw | | | rw |
− | | ? | + | | ??? this = (0xFFE9E & 1) ? 0x10 : 0 |
| |- | | |- |
| | 0x4F | | | 0x4F |
− | | 0x156 | + | | d(6) |
| | ro | | | ro |
− | | ??? | + | | |
| |- | | |- |
| | 0x50 | | | 0x50 |
Line 666: |
Line 672: |
| |- | | |- |
| | 0x7F | | | 0x7F |
− | | 19(?) | + | | d(0x13) |
| | ro | | | ro |
| | Various system state information. | | | Various system state information. |
− | byte 06: battery related? (seems to decrease while charging and increase while discharging) | + | byte 0x06: battery related? (seems to decrease while charging and increase while discharging) |
− | byte 09: system model (see [[Cfg:GetSystemModel#System_Model_Values|Cfg:GetSystemModel]] for values) | + | byte 0x09: system model (see [[Cfg:GetSystemModel#System_Model_Values|Cfg:GetSystemModel]] for values) |
− | byte 10: power LED related? 0 is off, 1 is red | + | byte 0x0A: power LED related? 0 is off, 1 is red |
− | byte 13: RGB LED red intensity | + | byte 0x0D: RGB LED red intensity |
− | byte 14: RGB LED green intensity | + | byte 0x0E: RGB LED green intensity |
− | byte 15: RGB LED blue intensity | + | byte 0x0F: RGB LED blue intensity |
− | byte 17: WiFi LED brightness | + | byte 0x11: WiFi LED brightness |
− | byte 18: raw button states? | + | byte 0x12: raw button states? |
| bit0: unset while power button is held | | bit0: unset while power button is held |
| bit1: unset while home button is held | | bit1: unset while home button is held |