Difference between revisions of "MVDSTD:GetConfig"

From 3dbrew
Jump to navigation Jump to search
(Replaced content with "=Request= {| class="wikitable" border="1" |- ! Index Word ! Description |- | 0 | Header code [0x001D0042] |- | 1 | Size, normally 0x11C. |- | 2 | (Size<<4) <nowiki>|</n...")
 
Line 15: Line 15:
 
|-
 
|-
 
| 3
 
| 3
−
| Output data ptr
+
| Output [[MVD_Services|config]] data ptr
 
|}
 
|}
  
Line 29: Line 29:
 
| 1
 
| 1
 
| Resultcode
 
| Resultcode
−
|}
 
−
 
−
=Structure=
 
−
{| class="wikitable" border="1"
 
−
|-
 
−
!  Offset
 
−
!  Size
 
−
!  Description
 
−
|-
 
−
| 0x0
 
−
| 0x4
 
−
| Input format type, see below.
 
−
|-
 
−
| 0x4
 
−
| 0x4
 
−
| The default for this is 0x0. Must be <=5. When non-zero, the type value at offset 0x0 must be one of the following: 0x00020001, 0x00010001, 0x00010005, 0x00010006, or 0x00010007.
 
−
|-
 
−
| 0x8
 
−
| 0x4
 
−
| The default for this is 0x0. This must be <=1.
 
−
|-
 
−
| 0x0C
 
−
| 0x4
 
−
| Input video width. Must be >=width_min and <width_max. This must be aligned: the low <dimensions_alignment>-bits must be clear.
 
−
|-
 
−
|-
 
−
| 0x10
 
−
| 0x4
 
−
| Input video height. Must be >=height_min and <height_max. This must be aligned: the low <dimensions_alignment>-bits must be clear.
 
−
|-
 
−
| 0x14
 
−
| 0x4
 
−
| Input data physical address, only set for color-conversion. This isn't used when the value at offset 0x4 is 0x1 or 0x5.
 
−
|-
 
−
| 0x18
 
−
| 0x4
 
−
| Physical data address, only used for color-conversion when the type value has bitmask 0x20000 set. This isn't used when the value at offset 0x4 is 0x1 or 0x5.
 
−
|-
 
−
| 0x1C
 
−
| 0x4
 
−
| Physical data address, only used for color-conversion when the type value is 0x20000. This isn't used when the value at offset 0x4 is 0x1 or 0x5.
 
−
|-
 
−
| 0x20
 
−
| 0x4
 
−
| Physical data address, for color-conversion. This isn't used when the value at offset 0x4 is 0x0 or 0x4.
 
−
|-
 
−
| 0x24
 
−
| 0x4
 
−
| Physical data address, only used for color-conversion when the type value has bitmask 0x20000 set. This isn't used when the value at offset 0x4 is 0x0 or 0x4.
 
−
|-
 
−
| 0x40
 
−
| 0x4
 
−
| When non-zero this enables usage of the 4 words starting at offset 0x44. Normally this is set to 0x0 for color-conversion, and 0x1 for video processing.
 
−
|-
 
−
| 0x44
 
−
| 0x4
 
−
| See offset 0x40. The default for this is 0x0. Must be <=widthval. Where widthval = <width value from the field at offset 0xC>. The low 4-bits of this value must be clear.
 
−
|-
 
−
| 0x48
 
−
| 0x4
 
−
| See offset 0x40. The default for this is 0x0. Must be <=heightval. Where heightval = <height value from the field at offset 0x10>. The low 4-bits of this value must be clear.
 
−
|-
 
−
| 0x4C
 
−
| 0x4
 
−
| See offset 0x40. Output video height. Must be >=16 and <=heightval. Where heightval = <height value from the field at offset 0x10>. The low 3-bits of this value must be clear.
 
−
|-
 
−
| 0x50
 
−
| 0x4
 
−
| See offset 0x40. Output video width. Must be >=width_min and <=widthval. Where widthval = <width value from the field at offset 0xC>. The low 3-bits of this value must be clear.
 
−
|-
 
−
| 0x54
 
−
| 0x4
 
−
| The default for this is 0x0. Must be <=5. For video processing, and when this value is non-zero, the type value at offset 0x0 must not be any of the following: 0x00010004, 0x00010001, 0x0x00100001, or 0x00200001. For video processing, the type value at offset 0x0 must not be 0x80000 when this value at offset 0x54 is non-zero.
 
−
|-
 
−
| 0x58
 
−
| 0x4
 
−
| Output format type, see below. SKATER writes value 0x40002 here. The physaddr at offset 0x68 is only checked when this is value 0x00020001.
 
−
|-
 
−
| 0x5C
 
−
| 0x4
 
−
| Output video width. Must be >=16, and must be <somewidth_statefield.
 
−
|-
 
−
| 0x60
 
−
| 0x4
 
−
| Output video height. Must be >=16, and must be <someheight_statefield.
 
−
|-
 
−
| 0x64
 
−
| 0x4
 
−
| Output data physical address.
 
−
|-
 
−
| 0x68
 
−
| 0x4
 
−
| Output data physical address, only set for color-conversion.
 
−
|}
 
−
 
−
The size of this structure is fixed to 0x11C-bytes. The user process does the LINEAR-mem vaddr->physaddr conversion for the above physaddrs, when modifying the config struct before using [[MVDSTD:SetConfig]]. For the above physaddrs that are checked/used, the physaddr must not be 0x0, and the physaddr must be 8-byte aligned(low 3-bits clear).
 
−
 
−
See [[MVD_Services|here]] regarding "MJPEG". For "MJPEG", the output frame is split into two images via the two output physaddrs.
 
−
 
−
For *_min/*_max/dimensions_alignment mentioned above: *_min = 16 for color-conversion, 48 for video processing. *_max = 2048 for color-conversion, 4672 for video processing. dimensions_alignment = 4 for color-conversion, 3 for video processing.
 
−
 
−
The configuration doesn't seem to change at all while SKATER is running video processing(each [[MVDSTD:SetConfig]] input config appears to the same).
 
−
 
−
Input format type values:
 
−
{| class="wikitable" border="1"
 
−
|-
 
−
!  Type value
 
−
!  Mode
 
−
!  Description
 
−
|-
 
−
| 0x00010001
 
−
| Color conversion
 
−
| yuyv422
 
−
|-
 
−
| 0x00010002
 
−
| Video processing
 
−
| ?
 
−
|-
 
−
| 0x00010004
 
−
| Video processing
 
−
| ?
 
−
|-
 
−
| 0x00010005
 
−
| Color conversion
 
−
| ?
 
−
|-
 
−
| 0x00010006
 
−
| Color conversion
 
−
| ?
 
−
|-
 
−
| 0x00010007
 
−
| Color conversion
 
−
| ?
 
−
|-
 
−
| 0x00020000
 
−
| Color conversion
 
−
| ?
 
−
|-
 
−
| 0x00020001
 
−
| Video processing
 
−
| H.264
 
−
|-
 
−
| 0x00020002
 
−
| ?
 
−
| ?
 
−
|-
 
−
| 0x00080000
 
−
| Video processing
 
−
| Same as 0x00020001, except with gray-scale?
 
−
|-
 
−
| 0x00080001
 
−
| Video processing
 
−
| ?
 
−
|-
 
−
| 0x00180001
 
−
| Video processing
 
−
| ?
 
−
|}
 
−
 
−
Output format type values:
 
−
{| class="wikitable" border="1"
 
−
|-
 
−
!  Type value
 
−
!  Description
 
−
|-
 
−
| 0x00010001
 
−
| See the input format type.
 
−
|-
 
−
| 0x00010005
 
−
| Unknown. A certain MVD state field must not be set to 0x8170 in order to use this.
 
−
|-
 
−
| 0x00010006
 
−
| Unknown, see 0x00010005 for the usage requirement.
 
−
|-
 
−
| 0x00010007
 
−
| Unknown, see 0x00010005 for the usage requirement.
 
−
|-
 
−
| 0x00010008
 
−
| A certain MVD-module state field must not be set to 0x8170 in order to use this. Whether this can actually be used is determined by another MVD-module state field.
 
−
|-
 
−
| 0x00010009
 
−
| Unknown, see 0x00010008 for the usage requirements.
 
−
|-
 
−
| 0x0001000A
 
−
| Unknown, see 0x00010008 for the usage requirements.
 
−
|-
 
−
| 0x0001000B
 
−
| Unknown, see 0x00010008 for the usage requirements.
 
−
|-
 
−
| 0x00020001
 
−
| Some sort of YUV format?
 
−
|-
 
−
| 0x00040000
 
−
| Unknown, doesn't write anything to the out-buffer when doing color-conversion.
 
−
|-
 
−
| 0x00040001
 
−
| RGB555
 
−
|-
 
−
| 0x00040002
 
−
| BGR565
 
−
|-
 
−
| 0x00040003
 
−
| Some sort of 16bit format it seems?
 
−
|-
 
−
| 0x00040004
 
−
| RGB565
 
−
|-
 
−
| 0x00041000
 
−
| Unknown, doesn't write anything to the out-buffer when doing color-conversion.
 
−
|-
 
−
| 0x00041001
 
−
| y400a?
 
−
|-
 
−
| 0x00041002
 
−
| y400a?
 
 
|}
 
|}
  
 
=Description=
 
=Description=
 
For this command, MVD module DMAs 0x11C-bytes from a MVD state structure to the above output buffer.
 
For this command, MVD module DMAs 0x11C-bytes from a MVD state structure to the above output buffer.

Latest revision as of 21:50, 21 April 2016

Request[edit]

Index Word Description
0 Header code [0x001D0042]
1 Size, normally 0x11C.
2 (Size<<4) | 12
3 Output config data ptr

Response[edit]

Index Word Description
0 Header code
1 Resultcode

Description[edit]

For this command, MVD module DMAs 0x11C-bytes from a MVD state structure to the above output buffer.

Retrieved from "https://www.3dbrew.org/w/index.php?title=MVDSTD:GetConfig&oldid=17082"