This page describes the structure of the buffer for GX command 1 with the registers at 0x1EF018E0. This buffer is used for GPU commands including OpenGL commands, each 8-byte entry in the buffer is a command. Cmd+0 is the command parameter, and cmd+4 is the command header.
Invalid GPU command parameters can cause the GPU to hang, this then causes the GSP module to hang as well.
Command Header
| Bit
|
Description
|
| 19-0
|
Command ID
|
| 30-20
|
Total words following the command, if any.
|
| 31
|
?
|
The first word in the parameter data structure is the command parameter value, the rest of the data structure is from the data following the command. The word after the last data structure word is padding when needed for 8-byte alignment, for the following command.
Commands
| CommandID
|
Parameter
|
Description
|
| 0x000F0010
|
Value is 0x12345678
|
This command is always the last command in the buffer.
|
| 0x000F0110
|
Value 0x1
|
This command is immediately before CmdID 0x000F0010, this is also used elsewhere for beginning rendering of object(s) as well.
|
| 0x000F0111
|
Value 0x1
|
This command is immediately before CmdID 0x000F0110, however CmdID 0x000F0110 doesn't always follow this command.
|
| 0x000F0040
|
u32, valid values are 0x1 and 0x2, values 0x0 and 0x3 have the same effect as value 0x2. Only bits 1-0 are used.
|
Disable/enable alpha testing. Parameter value 0x1 disables GL_ALPHA_TEST, while value 0x2 enables GL_ALPHA_TEST.
|
| 0x000F0041
|
float
|
This is used to initialize the projection matrix?
|
| 0x000F0042
|
float
|
This is used immediately after CmdID 0x000F0043, for the third parameter for CmdID 0x000F0041.
|
| 0x000F0043
|
float
|
This is used immediately after CmdID 0x000F0041, for the second parameter.
|
| 0x000F0044
|
float
|
This is used immediately after CmdID 0x000F0042, for the fourth parameter for CmdID 0x000F0041.
|
| 0x801F004D
|
First word in parameter structure
|
?
|
| 0x0002025E
|
u32, val<<8.
|
This sets the GL rendering mode.
|
| 0x000F0068
|
u32
|
This is used immediately after CmdID 0x000F0044.
|
| 0x000F006E
|
u32
|
This is used immediately after CmdID 0x000F011E, with the same input parameter value as CmdID 0x000F011E.
|
| 0x809F0081
|
|
This is used to set the current texture info used for rendering.
|
| 0x000F008E
|
u32
|
This texture-related command is used immediately after CmdID 0x809F0081.
|
| 0x00020100
|
u32, value is 0x00E40100
|
This command is used immediately before CmdID 0x000F0101.
|
| 0x000F0101
|
u32
|
Color related?
|
| 0x000F0116
|
u32
|
Unknown, this is used immediately after CmdID 0x000F011D.
|
| 0x000F0117
|
u32
|
Unknown, normally the input parameter is value 0x2.
|
| 0x000F011C
|
Physical address>>3
|
Normally this address is located in VRAM. This command is used immediately after 0x000F0116.
|
| 0x000F011D
|
Physical address>>3
|
This initializes the framebuffer address used for rendering, this framebuffer is used for the input framebuffer with GX command 3 and 4. This command is used immediately after CmdID 0x000F0117.
|
| 0x000F011E
|
u32
|
This sets the width and height for the framebuffer used for rendering. Therefore this is glViewport() with x=0 and y=0. This is used immediately after CmdID 0x000F011C.
|
| 0x8XXF0200
|
|
The first word in the parameter buffer structure seems to have a similar same effect as CmdID 0x000F0040, where param0 = val<<24.(Val 0x3 enables alpha testing, while other values disables it)
|
| 0x000F0227
|
u32
|
This specifies the address of an array containing vertex array indices, and the data-type of the indices, used for rendering primitives.
|
| 0x000F0228
|
u32 total elements in the array to use for rendering.
|
This command is used immediately after CmdID 0x000F0227.
|
| 0x000F02B0
|
u32, value is 0x7FFF0000 | val.
|
Texture related?
|
| 0x000F02C0
|
0x80000000 | Type
|
This is used immediately before CmdID 0xXXXF02C1. This type field controls the command parameter buffer type.
|
| 0xXXXF02C1
|
First word in the first entry
|
A list of entries follow this command.
|
Command Sets
glDrawElements()
| Command Index
|
CommandID
|
Parameter
|
Description
|
| 0
|
0x00020229
|
u32, val<<8.
|
Unknown, val is 0 or 1.
|
| 1-2
|
0x20253
|
Same as CmdID 0x00020229.
|
Unknown
|
| 3
|
0x0002025E
|
u32, val<<8.
|
This sets the GL rendering mode.
|
| 4
|
0x0004025E
|
Value 0
|
?
|
| 5
|
0x000F025F
|
Value 1
|
?
|
| 6
|
0x00010253
|
Value 0
|
?
|
| 7
|
0x000F0227
|
u32
|
This specifies the indices data-type, and the indices array address.
|
| 8
|
0x000F0228
|
u32
|
This specifies the number of elements in the array to use for rendering.
|
| 9
|
0x00010245
|
Value 0
|
?
|
| 10
|
0x000F022F
|
Value 1
|
?
|
| 11
|
0x00010245
|
Value 1
|
?
|
| 12
|
0x000F0231
|
Value 1
|
?
|
| 13
|
0x000F0111
|
Value 1
|
?
|
| 14
|
0x00020229
|
Value 0
|
?
|
| 15
|
0x00020253
|
Value 0
|
?
|
| 16
|
0x0002025E
|
Value 0
|
?
|
| 17
|
0x000C02BA
|
Value 0x7FFF0000
|
?
|
GL mode values for CmdID 0x0002025E
| Value
|
Description
|
| 0
|
Used to render quads?
|
| 1
|
GL_TRIANGLE_STRIP
|
| 2
|
GL_TRIANGLE_FAN
|
| 3
|
GL_TRIANGLES
|
| 4
|
Unknown, this seems to have the same effect as value 0.
|
Parameter value format for CmdID 0x000F0227
| Bit
|
Description
|
| 30-0
|
Indices array address, relative to VRAM physical address 0x18000000. Thus, when this relative address is 0x08XXXXXX, the array is located in FCRAM.
|
| 31
|
1 = indices data-type GL_UNSIGNED_SHORT, 0 = GL_UNSIGNED_BYTE.
|
Parameter value format for CmdID 0x000F011E
| Bit
|
Description
|
| 11-0
|
Framebuffer width
|
| 23-12
|
Framebuffer height - 1
|
| 24
|
Must be set
|
| 31-25
|
Unused?
|
Normally the width and height is set to the same dimensions used with GX command 3 and 4.
Texture info parameter structure for CmdID 0x809F0081
| Index Word
|
Description
|
| 0
|
?
|
| 1
|
The low u16 is the texture image width, and the high u16 is the texture image height.
|
| 2-3
|
?
|
| 4
|
Texture data physical address >> 3. This is normally located in VRAM.
|
| 5-9
|
?
|
Entries for CmdID 0xXXXF02C1
| Index Word
|
Description
|
| 0
|
float
|
| 1
|
float
|
| 2
|
float
|
Color Entry
| Index Word
|
Description
|
| 0
|
float Red component
|
| 1
|
float Blue component
|
| 2
|
float Green component
|
| 3
|
float Alpha?
|
| 4
|
float
|
| 5
|
float
|
Vertex Entry
| Index Word
|
Description
|
| 0
|
float X coordinate
|
| 1
|
float Y coordinate
|
| 2
|
float Z coordinate
|
Types for CmdID 0x000F02C0
| Value
|
Entries per chunk
|
Description
|
| 0x00
|
4
|
Related to model-view matrix translation?
|
| 0x04
|
4
|
Unknown, this is used immediately after type 0x00.
|
| 0x08
|
One color entry via two CmdID 0xXXXF02C1 entries.
|
Sets the color.
|
| 0x0A
|
4
|
Texture coordinates related?
|
| 0x0B
|
3
|
?
|
| 0x0C, 0x0D
|
3
|
Related to type 0x0A?
|
| 0x0E
|
4
|
Related to type 0x0A?
|
| 0x14
|
<=30
|
Geometry vertices
|
| 0x4C
|
4
|
?
|
| 0x50, 0x53, and 0x56
|
1
|
?
|
| 0x51, 0x54, and 0x57
|
1
|
?
|
| 0x52, 0x55, and 0x58
|
1
|
?
|
| 0x59
|
1
|
Unknown, the entry data is floats converted from s32s.
|
| 0x5A
|
2
|
Color related?
|
| 0x5C
|
1
|
?
|