CTRCARD Registers

From 3dbrew
Revision as of 22:30, 27 October 2012 by Neimod (talk | contribs)
Jump to navigation Jump to search

Registers

NAME PHYSICAL ADDRESS WIDTH
REG_CTRCARDCNT 0x10004000 4
REG_CTRCARDSECCNT 0x10004008 4
REG_CTRCARDSECSEED 0x10004010 4
REG_CTRCARDCMD 0x10004020 16
REG_CTRCARDFIFO 0x10004030 4

REG_CTRCARDCNT

BIT DESCRIPTION
28 Reset (Read-only 1=High, 0=Low)
29 Transfer mode (1=Write, 0=Read)
30 Interrupt enable (1=Enable, 0=Disable)
31 Start (1=Busy, 0=Idle)

REG_CTRCARDCMD

Specifies the 16-byte command to send. The command is split into 32-bit words, and stored as least significant word first, with each word itself in big-endian format.