LCD Registers
Jump to navigation
Jump to search
Other registers that used to be documented on this page are now at GPU Registers.
Registers
NAME | PHYSICAL ADDRESS | PROCESS VIRTUAL ADDRESS | KERNEL VIRTUAL ADDRESS | WIDTH |
---|---|---|---|---|
Parallax barrier enable | 0x10202000 | 0x1ED02000 | 0xFFFD6000 | 0x4 |
Parallax barrier PWM | 0x10202004 | 0x1ED02004 | 0xFFFD6004 | 0x4 |
LCD status | 0x10202008 | 0x1ED02008 | 0xFFFD6008 | 0x4 |
LCD clock disable | 0x1020200C | 0x1ED0200C | 0xFFFD600C | 0x4 |
? | 0x10202010 | 0x1ED02010 | 0xFFFD6010 | 0x4 |
LCD reset | 0x10202014 | 0x1ED02014 | 0xFFFD6014 | 0x4 |
Top Screen LCD Configuration | 0x10202200 | 0x1ED02200 | 0xFFFD6200 | 0x600 |
Bottom Screen LCD Configuration | 0x10202A00 | 0x1ED02A00 | 0xFFFD6A00 | 0x600 |
? | 0x10203200 | 0x1ED03200 | 0xFFFD7200 | 0x40 |
On screen-init (error screen), Boot11 sets 0x10202004 to 0xA390A39.
LCD Configuration
Offset | Size | Description |
---|---|---|
0x00 | 0x4 | Flags |
0x04 | 0x4 | Fill Color |
0x10 | 0x10 | Adaptive Backlight Area |
0x20 | 0x4 | ? |
0x24 | 0x4 | ? |
0x28 | 0x4 | ? |
0x2C | 0x4 | ? |
0x30 | 0x4 | ? |
0x38 | 0x4 | Filter Index |
0x3C | 0x4 | ? |
0x40 | 0x4 | Backlight Level |
0x44 | 0x4 | Backlight Interval |
0x60 | 0x20 | Dither |
0x80 | 0x4 | ? |
0x100 | 0x100 | LCD calibration data, pulled from nand:/ro/sys/HWCAL0.dat offset 0x77C.
N3DS only. This area on old3DS is zero-filled and not writable. |
0x200 | 0x400 | Filter lookup table |
Flags
Bit | Description |
---|---|
0 | Adaptive backlight on |
8 | ? |
9 | ? |
Fill Color
Bit | Description |
---|---|
7-0 | Red component intensity |
15-8 | Green component intensity |
23-16 | Blue component intensity |
24 | Enable |
When the enable bit is set, the specified solid color is displayed on the LCD instead of the framebuffer.
Adaptive Backlight Area
Offset | Description |
---|---|
0x00 | X begin |
0x04 | X end |
0x08 | Y begin |
0x0C | Y end |
The values refer to 90° clockwise rotated screens.
Backlight Level
Bit | Description |
---|---|
9-0 | Backlight PWM duty on (0 = off) |
Backlight Interval
Bit | Description |
---|---|
9-0 | Backlight PWM Interval, minus 1 |
16 | ? |
17 | ? |
18 | ? |