Request[edit]
| Index Word
|
Description
|
| 0
|
Header code [0x000E0080]
|
| 1
|
AppID
|
| 2
|
Parameter Size (max is 0x1000)
|
The following is located 0x100-bytes after the beginning of the above command buffer, as a static buffer descriptor receiving the static buffer in the response:
| Index Word
|
Description
|
| 0
|
(Parameter Size << 14) | 2
|
| 1
|
void*, Parameter Output
|
Response[edit]
| Index Word
|
Description
|
| 0
|
Header code [0x000E0104]
|
| 1
|
Result code
|
| 2
|
Sender AppID
|
| 3
|
Command
|
| 4
|
Actual Parameter Size
|
| 5
|
0x0
|
| 6
|
Handle Parameter
|
| 7
|
(Actual Parameter Size << 14) | 2 (static buffer descriptor)
|
| 8
|
void*, Parameter to send
|
Description[edit]
This is exactly the same as APT:ReceiveParameter (except for the word value prior to the output handle), except this will not clear the flag (except when responseword[3] == 8 || responseword[3] == 9) in NS state. Thus, the parameter data can still be loaded via APT:ReceiveParameter/APT:GlanceParameter after using this command, except when responseword[3] is one of the above values.