Changes

|}

|}

The LINEAR memory-operation indicates that the mapped physical address is always MappedVAddr+0x0C000000, thus this memory can be used for hardware devices' DMA(such as the [[GPU]]). Addr0+size for this must be within the 0x14000000-0x1C000000 range when Addr0 is non-zero(Addr1 must be zero), Addr0 isn't actually used by svcControlMemory for mapping memory since the kernel determines what vaddr to map. LINEAR memory is allocated in FCRAM the same way as any other virtual memory(like the regular process heap, etc).

The LINEAR memory-operation indicates that the mapped physical address is always MappedVAddr+0x0C000000, thus this memory can be used for hardware devices' DMA(such as the [[GPU]]). Addr0+size for this must be within the 0x14000000-0x1C000000 range when Addr0 is non-zero(Addr1 must be zero), Addr0 isn't actually used by svcControlMemory for mapping memory: Addr0 is not used by the kernel after doing address-range checks. The kernel determines what physical-address to use by allocating memory from FCRAM(about the same way as other memory), which is then used to determine the virtual-address.

The input mem-region value for svcControlMemory is only used(when non-zero) when the PID is value 1, for the [[FIRM]] ARM11 "loader" module.

The input mem-region value for svcControlMemory is only used(when non-zero) when the PID is value 1, for the [[FIRM]] ARM11 "loader" module.