Changes

936 bytes added ,  23:07, 28 March 2011
no edit summary
Line 1: Line 1:  +
[[File:Gamecard.jpg|thumb|right|A 3DS gamecard]]
 +
[[File:GamecardPhy.jpg|thumb|right|Close-up of PCB]]
 +
 
===Physical interface===
 
===Physical interface===
 
The 3DS gamecards have the same physical interface as regular DS and DSi gamecards. There is only a minor cosmetic difference in the plastic case, which has a small extruding notch on the top-right side. As such, it prevents insertion of the gamecard into old Nintendo DS or DSi systems.  
 
The 3DS gamecards have the same physical interface as regular DS and DSi gamecards. There is only a minor cosmetic difference in the plastic case, which has a small extruding notch on the top-right side. As such, it prevents insertion of the gamecard into old Nintendo DS or DSi systems.  
Line 4: Line 7:  
When modifying the case so that the 3DS gamecard fits in a DS or DSi system, those systems will refuse to detect the gamecard and show no banner icon.
 
When modifying the case so that the 3DS gamecard fits in a DS or DSi system, those systems will refuse to detect the gamecard and show no banner icon.
   −
[[File:Gamecard.jpg|thumb|right|A 3DS gamecard]]
+
{| class="wikitable" border="1"
[[File:GamecardPhy.jpg|thumb|right|Close-up of PCB]]
+
|-
 +
!  Pin
 +
!  Name
 +
!  Description
 +
|-
 +
|  1
 +
|  GND
 +
|  Ground
 +
|-
 +
|  2
 +
|  CLK
 +
|  Clock. Frequencies 6.7MHz and 4.2MHz)
 +
|-
 +
|  3
 +
|  NC
 +
|  Not connected. Possibly used to program cards.
 +
|-
 +
|  4
 +
|  RCS
 +
|  ROM select, active low. Pulled low to start a ROM transfer.
 +
|-
 +
|  5
 +
|  RST
 +
|  Reset, active low.
 +
|-
 +
|  6
 +
|  ECS
 +
|  Savegame chip select, active low. Pulled low to start a savegame SPI transfer.
 +
|-
 +
|  7
 +
|  IRQ
 +
|  Removal detection.
 +
|-
 +
|  8
 +
|  VCC
 +
|  Powersupply 3.3V.
 +
|-
 +
|  9
 +
|  DAT0
 +
|  Bidirectional data bus.
 +
|-
 +
|  10
 +
|  DAT1
 +
|  Bidirectional data bus.
 +
|-
 +
| 11
 +
| DAT2
 +
|  Bidirectional data bus.
 +
|-
 +
|  12
 +
| DAT3
 +
| Bidirectional data bus.
 +
|-
 +
|  13
 +
|  DAT4
 +
|  Bidirectional data bus.
 +
|-
 +
|  14
 +
|  DAT5
 +
|  Bidirectional data bus.
 +
|-
 +
|  15
 +
|  DAT6
 +
|  Bidirectional data bus / SPI data from savegame chip.
 +
|-
 +
|  16
 +
|  DAT7
 +
|  Bidirectional data bus / SPI data to savegame chip.
 +
|-
 +
|  17
 +
|  GND
 +
|  Ground
 +
|}
 +
 
    
===Protocol===
 
===Protocol===
 
The communication protocol between the 3DS system and the 3DS gamecard has changed completely in comparison with the DS and DSi gamecard communication protocol.
 
The communication protocol between the 3DS system and the 3DS gamecard has changed completely in comparison with the DS and DSi gamecard communication protocol.
604

edits