525
edits
Changes
→Device 3
| System power control:
| System power control:
bit0: power off
bit0: power off
bit1: reboot (unused?)
bit1: full reboot (unused). Discards things like [[CONFIG9_Registers#CFG9_BOOTENV|CFG9_BOOTENV]]
bit2: reboot (used by mcu sysmodule and LgyBg)
bit2: reboot. Preserves [[CONFIG9_Registers#CFG9_BOOTENV|CFG9_BOOTENV]], etc.
bit3: used by LgyBg to power off, causes hangs in 3DS-mode
bit3: reset FCRAM (present in by LgyBg. Unused because a system reboot does the same thing & a PDN reg also implements this function.
bit4: used by PTM to signal that sleep mode is about to be entered
bit4: signal that sleep mode is about to be entered (used by PTM)
Bit 4 sets a bit at a RAM address which seems to control the watcdog timer state, then this bit is immediately unmasked. This field has a bitmask of 0x0F.
Bit 4 sets a bit at a RAM address which seems to control the watcdog timer state, then this bit is immediately unmasked. This field has a bitmask of 0x0F.
|-
|-
| d
| d
| wo
| wo
| Writing 0x72 ('r') resets the MCU, writing 0x77 ('w') resets its WDT. Seems to require special conditions, or doesn't work on current units
| Writing 0x72 ('r') resets the MCU, but this is stubbed on retail?
|-
|-
| 0x24
| 0x24