3
edits
Changes
Fix ARM7 AGB-related info
| <code>u16</code>
| <code>u16</code>
| <code>0x10018104</code>
| <code>0x10018104</code>
| <code>ARM7_?_CNT</code>
| <code>ARM7_SAVE_MEMORY_CNT</code>
| 2
| 2
|-
|-
| <code>u16</code>
| <code>u16</code>
| <code>0x10018108</code>
| <code>0x10018108</code>
| <code>ARM7_RTC_CNT?</code>
| <code>ARM7_RTC_CNT</code>
| 2
| 2
|-
|-
| <code>u32</code>
| <code>u32</code>
| <code>0x10018110</code>
| <code>0x10018110</code>
| <code>ARM7_RTC_VAL_LO</code>
| <code>ARM7_RTC_VAL_DATE</code>
| 4
| 4
|-
|-
| <code>u32</code>
| <code>u32</code>
| <code>0x10018114</code>
| <code>0x10018114</code>
| <code>ARM7_RTC_VAL_HI</code>
| <code>ARM7_RTC_VAL_TIME</code>
| 4
| 4
|-
|-
| <code>u32</code>
| <code>u32</code>
| <code>0x10018118</code>
| <code>0x10018118</code>
| <code>ARM7_RTC_LO?</code>
| <code>ARM7_RTC_VAL_SETTINGS</code>
| 4
| 4
|-
|-
| <code>u32</code>
| <code>u32</code>
| <code>0x1001811C</code>
| <code>0x1001811C</code>
| <code>ARM7_RTC_HI?</code>
| <code>ARM7_RTC_VAL_ADJUST</code>
| 4
| 4
|-
|-
| <code>arm7_save_cfg_t</code>
| <code>u32</code>
| <code>0x10018120</code>
| <code>0x10018120</code>
| <code>ARM7_SAVE_CFG</code>
| <code>ARM7_SAVE_FLASH_CHIP_ERASE_CYCLES</code>
| 16
| 4
|-
| <code>u32</code>
| <code>0x10018124</code>
| <code>ARM7_SAVE_FLASH_SECTOR_ERASE_CYCLES</code>
| 4
|-
| <code>u32</code>
| <code>0x10018128</code>
| <code>ARM7_SAVE_FLASH_PROGRAM_CYCLES</code>
| 4
|-
| <code>u32</code>
| <code>0x1001812C</code>
| <code>ARM7_SAVE_EEPROM_WRITE_CYCLES</code>
| 4
|}
|}
===ARM7_SAVE_MODE===
===ARM7_SAVE_MODE===
This tells the save storage emulation hardware which device type to emulate (64k EEPROM, a 512k Flash chip model, and SRAM are all that have been used officially; several other 512k Flash chip models, two 1 Mbit Flash chip models and 8k EEPROM are also supported). This comes directly from the [[3DS_Virtual_Console#Footer|ROM footer]].
This tells the save storage emulation hardware which device type to emulate (64k EEPROM, a 512k Flash chip model, and SRAM are all that have been used officially; several other 512k Flash chip models, two 1 Mbit Flash chip models and 4k EEPROM are also supported). This comes directly from the [[3DS_Virtual_Console#Footer|ROM footer]].
===ARM7_SAVE_MEMORY_CNT===
This register controls whether the GBA save memory region located at <code>0x08080000</code> is accessible to ARM9 or to the ARM7 (via the emulated save chip). When it's set to 0x0 ARM7 has access, while ARM9 has access when it's set to 0x1.
===ARM7_RTC_CNT===
This register controls the emulated RTC hardware and access to some of its registers.
To set or read the data from ARM7_RTC_VAL_SETTINGS or ARM7_RTC_VAL_ADJUST, first <code>ARM7_RTC_CNT</code>'s bit 15 is waited on. Next <code>ARM7_RTC_CNT</code> is set to zero.
For a write: the two registers are written, a 1 is written to <code>ARM7_RTC_CNT</code>, and it is waited on the same as before. Afterwards if bit 14 is not set in <code>ARM7_RTC_CNT</code>, the value was set successfully. This also starts the emulated RTC.
For a read: a 2 is written to <code>ARM7_RTC_CNT</code>, it's waited on again. Afterwards, if bit 14 is not set, the aforementioned registers can be read. Presumably the hardware can be re-enabled by writing a zero to <code>ARM7_RTC_CNT</code> at this point, but <code>AGB_FIRM</code> does not.
===ARM7_RTC_VAL===
===ARM7_RTC_VAL_DATE / ARM7_RTC_VAL_TIME===
These registers are set to the current LgyP9 date+time before ARM7_RTC_CNT/ARM7_RTC_? registers are used.
These registers are set to the current LgyP9 date+time before the other RTC-related registers are used.
They contain the following structure, set up on the stack then both u32 registers are written one after the other:
They contain the following structure, set up on the stack then both u32 registers are written one after the other:
s8 second_bcd;
s8 second_bcd;
===ARM7_RTC ''?''===
===ARM7_RTC_VAL_SETTINGS===
This register appears to contain the emulated RTC chip's configuration (accessible via the "control" register on real hardware), containing settings like 12/24-hour mode. Access is controlled by <code>ARM7_RTC_CNT</code> (see above).
===ARM7_RTC_VAL_ADJUST===
This register appears to contain the emulated RTC chip's time difference, relative to <code>ARM7_RTC_VAL_DATE</code> / <code>ARM7_RTC_VAL TIME</code>, in seconds. Access is controlled by <code>ARM7_RTC_CNT</code> (see above).
===ARM7_SAVE_FLASH_CHIP_ERASE_CYCLES===
This register seems to configure the emulated Flash chip to take a specified amount of time to complete a chip erase operation (relative to the DS' ARM7/bus speed). Two variations exist in officially released games, one meant for 512k Flash chips and one for 1 Mbit Flash chips. It is copied from from rom footer + <code>0x10</code>.
===ARM7_SAVE_FLASH_SECTOR_ERASE_CYCLES===
This register seems to configure the emulated Flash chip to take a specified amount of time to complete a sector erase operation (relative to the DS' ARM7/bus speed). Two variations exist in officially released games, one meant for 512k Flash chips and one for 1 Mbit Flash chips. It is copied from from rom footer + <code>0x14</code>.
===ARM7_SAVE_FLASH_PROGRAM_CYCLES===
This register seems to configure the emulated Flash chip to take a specified amount of time to complete a program operation (relative to the DS' ARM7/bus speed). Two variations exist in officially released games, one meant for 512k Flash chips and one for 1 Mbit Flash chips. It is copied from from rom footer + <code>0x18</code>.
===ARM7_SAVE_CFG===
===ARM7_SAVE_EEPROM_WRITE_CYCLES===
This is copied from rom footer + <code>0x10</code>. It presumably configures details about storage, such as IDs, and likely allows enabling the RTC for games which need it. Format of this data is unknown, and slightly difficult to determine without some hardware poking.
This register seems to configure the emulated EEPROM chip to take a specified amount of time to complete a write operation (relative to the DS' ARM7/bus speed). Two variations exist in officially released games, one meant for 64k EEPROM chips and one for 4k EEPROM chips. It is copied from from rom footer + <code>0x1C</code>.
==Memory map==
==Memory map==
* <code>0x08060000</code> → <code>0x03800000</code>, ARM7 WRAM (64KiB)
* <code>0x08060000</code> → <code>0x03800000</code>, ARM7 WRAM (64KiB)
* <code>0x080B0000</code> → <code>0x03000000</code>, GBA IWRAM (32KiB)
* <code>0x080B0000</code> → <code>0x03000000</code>, GBA IWRAM (32KiB)
* <code>0x08080000</code> → EEPROM/SRAM/Flash 512k/Flash 1Mbit (the 2 512k banks are contiguous in memory). Appears to be mirrored at <code>0x080C0000</code>, maybe first mapping is read-only and second is writable? <code>0x10018104</code> must be set to 1 before reading memory here, and restored to its previous value afterwards
* <code>0x08080000</code> → EEPROM/SRAM/Flash 512k/Flash 1Mbit (the 2 512k banks are contiguous in memory). Access is controlled by <code>ARM7_SAVE_MEMORY_CNT</code> (see above). <code>0x080C0000</code> holds a mirror which is used by LgyP9 on boot to read the SD savedata before the mode switch, the data is then copied.
* <code>0x01FFC000</code> → <code>0x01000000</code>, ARM9 ITCM under TWL (16KiB)
* <code>0x01FFC000</code> → <code>0x01000000</code>, ARM9 ITCM under TWL (16KiB)