Trusted
225
edits
Changes
→Device 3
| 0x02
| 0x02
| d
| d
| wo
| rw
| 2bit value, writing will mask away/"acknowledge" the event, set to 3 by mcuMainLoop on reset if reset source is Watchdog
| 2bit value, writing will mask away/"acknowledge" the event, set to 3 by mcuMainLoop on reset if reset source is Watchdog
bit0: RTC clock value got reset to defaults
bit0: RTC clock value got reset to defaults
| 0x3D
| 0x3D
0x3E
0x3E
| s (2)
| s
| ro
| ro
| RTC tick counter (resets to 0 when the seconds increase)
| RTC tick counter / "ITMC" (when resets to 0 the seconds increase)
Only reading 0x3D will update the in-RAM value
|-
|-
| 0x3F
| 0x3F
|-
|-
| 0x4C
| 0x4C
0x4E
0x4D
| s
| ??
| ??
| ??
|-
| 0x4E
| d
| rw
| rw
| ?
| ??? this = (0xFFE9E & 1) ? 0x10 : 0
|-
|-
| 0x4F
| 0x4F
| 0x156
| d(6)
| ro
| ro
| ???
|
|-
|-
| 0x50
| 0x50
|-
|-
| 0x7F
| 0x7F
| 19(?)
| d(0x13)
| ro
| ro
| Various system state information.
| Various system state information.
byte 06: battery related? (seems to decrease while charging and increase while discharging)
byte 0x06: battery related? (seems to decrease while charging and increase while discharging)
byte 09: system model (see [[Cfg:GetSystemModel#System_Model_Values|Cfg:GetSystemModel]] for values)
byte 0x09: system model (see [[Cfg:GetSystemModel#System_Model_Values|Cfg:GetSystemModel]] for values)
byte 10: power LED related? 0 is off, 1 is red
byte 0x0A: power LED related? 0 is off, 1 is red
byte 13: RGB LED red intensity
byte 0x0D: RGB LED red intensity
byte 14: RGB LED green intensity
byte 0x0E: RGB LED green intensity
byte 15: RGB LED blue intensity
byte 0x0F: RGB LED blue intensity
byte 17: WiFi LED brightness
byte 0x11: WiFi LED brightness
byte 18: raw button states?
byte 0x12: raw button states?
bit0: unset while power button is held
bit0: unset while power button is held
bit1: unset while home button is held
bit1: unset while home button is held