Changes

     sint8_t peripheral_id; // @0 If not *_IS_RAM set, this must be < 0x1E.

     sint8_t peripheral_id; // @0 If not *_IS_RAM set, this must be < 0x1E.

     uint8_t allowed_burst_sizes; // @1 Accepted values: 4, 8, 4|8 = 12, 1|2|4|8 = 15  

     uint8_t allowed_burst_sizes; // @1 Accepted values: 4, 8, 4|8 = 12, 1|2|4|8 = 15  

     sint16_t max_burst_total; // @2 Burst length * burst size

     sint16_t gather_granule_size; // @2

     sint16_t transfer_size?; // @4 Must not be 0 if peripheral_id == 0xFF.

     sint16_t gather_stride; // @4 Has to be >= 0, must not be 0 if peripheral_id == 0xFF.

     sint16_t unk4; // @6

     sint16_t scatter_granule_size; // @6

     sint16_t transfer_stride?; // @8

     sint16_t scatter_stride; // @8 Can be negative.

  }

  }

  .peripheral_id = 0xFF,

  .peripheral_id = 0xFF,

  .allowed_burst_sizes = 1 | 2 | 4 | 8,

  .allowed_burst_sizes = 1 | 2 | 4 | 8,

  .max_burst_total = 0x80,

  .gather_granule_size = 0x80,

  .transfer_size? = 0,

  .gather_stride = 0,

  .unk4 = 0x80,

  .scatter_granule_size = 0x80,

  .transfer_stride? = 0,

  .scatter_stride = 0,

If SHALL_BLOCK is set, the thread will sleep until the DMA engine is ready. If not set, the SVC will return 0xD04007F0 if the DMA channel is busy.

If SHALL_BLOCK is set, the thread will sleep until the DMA engine is ready. If not set, the SVC will return 0xD04007F0 if the DMA channel is busy.