Changes

If (u8*)0x10000000 bit 1 is clear (which means that this happens only on hard reboots), it does the following things:

If (u8*)0x10000000 bit 1 is clear (which means that this happens only on hard reboots), it does the following things:

* Clears 0x200-bytes on the stack, then reads [[Flash_Filesystem|NAND]] sector 0x96(NAND image offset 0x12C00), with size 0x200-bytes into that stack buffer.

* Clears 0x200-bytes on the stack, then reads [[Flash_Filesystem|NAND]] sector 0x96(NAND image offset 0x12C00), with size 0x200-bytes into that stack buffer.

* Checks u8 0x10000000 bit1 again, if it's set then it executes a panic function(set r0-r2=0, execute nop instruction, then execute instruction "bkpt 0x99"). Hashes data from the region [[IO_Registers|0x10012000-0x10012090]] using SHA256 via the [[SHA_Registers|SHA]] hardware.

* Checks u8 0x10000000 bit1 again, if it's set then it executes a panic function(set r0-r2=0, execute nop instruction, then execute instruction "bkpt 0x99"). Hashes data from the OTP region [[IO_Registers|0x10012000-0x10012090]] using SHA256 via the [[SHA_Registers|SHA]] hardware.

* Clears bit6 in [[AES_Registers|REG_AESKEYCNT]]. Initializes AES keyslot 0x11 keyX, keyY to the lower and higher portion of the above hash, respectively. Due to the above hashed data, the keyX+keyY here are console-unique.

* Clears bit6 in [[AES_Registers|REG_AESKEYCNT]]. Initializes AES keyslot 0x11 keyX, keyY to the lower and higher portion of the above hash, respectively. Due to the above hashed data, the keyX+keyY here are console-unique.

* Decrypts the first 0x10-byte block in the above read NAND sector with keyslot 0x11 using AES-ECB. [[9.6.0-24|9.6.0-X]]: Then it decrypts the 0x10-bytes at offset 0x10 in the sector with keyslot 0x11.

* Decrypts the first 0x10-byte block in the above read NAND sector with keyslot 0x11 using AES-ECB. [[9.6.0-24|9.6.0-X]]: Then it decrypts the 0x10-bytes at offset 0x10 in the sector with keyslot 0x11.