6,264
edits
Changes
→KernelSetState
| No
| No
| This initializes the programID for launching [[FIRM]], then triggers launching [[FIRM]]. Param0 is unused. Param1 is the programID-low, and the programID-high is 0x00040138. Param2 is used only with the [[New_3DS]] kernel, pm-module uses value 0 with this. With New3DS kernel, it forces the programIDlow to be the New3DS NATIVE_FIRM, when the input programIDlow is for the Old3DS NATIVE_FIRM and Param2==0.
| This initializes the programID for launching [[FIRM]], then triggers launching [[FIRM]]. Param0 is unused. Param1 is the programID-low, and the programID-high is 0x00040138. Param2 is used only with the [[New_3DS]] kernel, pm-module uses value 0 with this. With New3DS kernel, it forces the programIDlow to be the New3DS NATIVE_FIRM, when the input programIDlow is for the Old3DS NATIVE_FIRM and Param2==0.
On New3DS, the kernel disables the additional New3DS cache hw prior to calling the firmlaunch function from the <handler for the KernelSetState-types called via funcptr>.
|-
|-
| 1
| 1
| No
| No
| This triggers an MCU (hard) reboot. Param0-3 are unused. This reboot is triggered via device address 0x4A on the second [[I2C]] bus (the MCU). Register address 0x20 is written to with value 4. This code will not return.
| This triggers an MCU (hard) reboot. Param0-3 are unused. This reboot is triggered via device address 0x4A on the second [[I2C]] bus (the MCU). Register address 0x20 is written to with value 4. This code will not return.
On New3DS, the kernel disables the additional New3DS cache hw prior to calling the reboot function from the <handler for the KernelSetState-types called via funcptr>.
|-
|-
| 8
| 8