A total of 24 sessions can be open for each of these services combined. The commands for each service are handled by the PTM module main() thread.
User PTM Service "ptm:u"
| Command Header | Description |
|---|---|
| 0x00010002 | RegisterAlarmClient |
| 0x00020080 | SetRtcAlarm |
| 0x00030000 | GetRtcAlarm |
| 0x00040000 | CancelRtcAlarm |
| 0x00050000 | GetAdapterState |
| 0x00060000 | GetShellState |
| 0x00070000 | GetBatteryLevel |
| 0x00080000 | GetBatteryChargeState |
| 0x00090000 | GetPedometerState |
| 0x000A0042 | GetStepHistoryEntry |
| 0x000B00C2 | GetStepHistory |
| 0x000C0000 | GetTotalStepCount |
| 0x000D0040 | SetPedometerRecordingMode |
| 0x000E0000 | GetPedometerRecordingMode |
| 0x000F0084 | GetStepHistoryAll |
PlayHistory PTM Service "ptm:play"
| Command Header | Description |
|---|---|
| 0x00010002 | RegisterAlarmClient |
| 0x00020080 | SetRtcAlarm |
| 0x00030000 | GetRtcAlarm |
| 0x00040000 | CancelRtcAlarm |
| 0x00050000 | GetAdapterState |
| 0x00060000 | GetShellState |
| 0x00070000 | GetBatteryLevel |
| 0x00080000 | GetBatteryChargeState |
| 0x00090000 | GetPedometerState |
| 0x000A0042 | GetStepHistoryEntry |
| 0x000B00C2 | GetStepHistory |
| 0x000C0000 | GetTotalStepCount |
| 0x000D0040 | SetPedometerRecordingMode |
| 0x000E0000 | GetPedometerRecordingMode |
| 0x000F0084 | GetStepHistoryAll |
| 0x08070082 | GetPlayHistory |
| 0x08080000 | GetPlayHistoryStart |
| 0x08090000 | GetPlayHistoryLength |
| 0x080B0080 | CalcPlayHistoryStart |
SysMenu PTM Service "ptm:sysm"
| Command Header | Description |
|---|---|
| 0x00010002 | RegisterAlarmClient |
| 0x00020080 | SetRtcAlarm |
| 0x00030000 | GetRtcAlarm |
| 0x00040000 | CancelRtcAlarm |
| 0x00050000 | GetAdapterState |
| 0x00060000 | GetShellState |
| 0x00070000 | GetBatteryLevel |
| 0x00080000 | GetBatteryChargeState |
| 0x00090000 | GetPedometerState |
| 0x000A0042 | GetStepHistoryEntry |
| 0x000B00C2 | GetStepHistory |
| 0x000C0000 | GetTotalStepCount |
| 0x000D0040 | SetPedometerRecordingMode |
| 0x000E0000 | GetPedometerRecordingMode |
| 0x000F0084 | GetStepHistoryAll |
| 0x040100C0 | SetRtcAlarmEx |
| 0x04020042 | ReplySleepQuery |
| 0x04030042 | NotifySleepPreparationComplete |
| 0x04040102 | SetWakeupTrigger |
| 0x04050000 | GetAwakeReason |
| 0x04060000 | RequestSleep |
| 0x040700C0 | ShutdownAsync |
| 0x04080000 | Awake |
| 0x04090080 | RebootAsync |
| 0x040A0000 | This just writes u8 value0 to cmdreply+8(this command was added with 8.0.0-18). |
| 0x08010640 | SetInfoLEDPattern (These 4 LED commands are used for the notification LED, see MCU regarding boot fail with invalid parameters) |
| 0x08020040 | SetInfoLEDPatternHeader |
| 0x08030000 | GetInfoLEDStatus |
| 0x08040040 | SetBatteryEmptyLEDPattern |
| 0x08050000 | ClearStepHistory |
| 0x080600C2 | SetStepHistory |
| 0x08070082 | GetPlayHistory |
| 0x08080000 | GetPlayHistoryStart |
| 0x08090000 | GetPlayHistoryLength |
| 0x080A0000 | ClearPlayHistory |
| 0x080B0080 | CalcPlayHistoryStart |
| 0x080C0080 | SetUserTime |
| 0x080D0000 | InvalidateSystemTime |
| 0x080E0140 | NotifyPlayEvent |
| 0x080F0000 | IsLegacyPowerOff |
| 0x08100000 | ClearLegacyPowerOff |
| 0x08110000 | GetShellStatus |
| 0x08120000 | IsShutdownByBatteryEmpty |
| 0x08130000 | FormatSavedata |
| 0x08140000 | GetLegacyJumpProhibitedFlag |