PTM Services
A total of 24 sessions can be open for each of these services combined. The commands for each service are handled by the PTM module main() thread.
User PTM Service "ptm:u" / PTM servicesEdit
Command Header | Description |
---|---|
0x00010002 | RegisterAlarmClient |
0x00020080 | SetRtcAlarm |
0x00030000 | GetRtcAlarm |
0x00040000 | CancelRtcAlarm |
0x00050000 | GetAdapterState |
0x00060000 | GetShellState |
0x00070000 | GetBatteryLevel |
0x00080000 | GetBatteryChargeState |
0x00090000 | GetPedometerState |
0x000A0042 | GetStepHistoryEntry |
0x000B00C2 | GetStepHistory |
0x000C0000 | GetTotalStepCount |
0x000D0040 | SetPedometerRecordingMode |
0x000E0000 | GetPedometerRecordingMode |
0x000F0084 | GetStepHistoryAll |
The above commands are available for all PTM services, except the SetSystemTime service.
PlayHistory PTM Service "ptm:play"Edit
Command Header | Description |
---|---|
0x08070082 | GetPlayHistory |
0x08080000 | GetPlayHistoryStart |
0x08090000 | GetPlayHistoryLength |
0x080B0080 | CalcPlayHistoryStart |
SystemControl PTM Service "ptm:s"Edit
Identical to the below "ptm:sysm"
SysMenu PTM Service "ptm:sysm"Edit
Command Header | Description |
---|---|
0x040100C0 | SetRtcAlarmEx |
0x04020042 | ReplySleepQuery |
0x04030042 | NotifySleepPreparationComplete |
0x04040102 | SetWakeupTrigger |
0x04050000 | GetAwakeReason |
0x04060000 | RequestSleep |
0x040700C0 | ShutdownAsync |
0x04080000 | Awake |
0x04090080 | RebootAsync |
0x040A0000 | CheckNew3DS (Added with 8.0.0-18) |
0x08010640 | SetInfoLEDPattern (These 4 LED commands are used for the notification LED, see MCU regarding boot fail with invalid parameters) |
0x08020040 | SetInfoLEDPatternHeader |
0x08030000 | GetInfoLEDStatus |
0x08040040 | SetBatteryEmptyLEDPattern |
0x08050000 | ClearStepHistory |
0x080600C2 | SetStepHistory |
0x08070082 | GetPlayHistory |
0x08080000 | GetPlayHistoryStart |
0x08090000 | GetPlayHistoryLength |
0x080A0000 | ClearPlayHistory |
0x080B0080 | CalcPlayHistoryStart |
0x080C0080 | SetUserTime |
0x080D0000 | InvalidateSystemTime |
0x080E0140 | NotifyPlayEvent |
0x080F0000 | GetSoftwareClosedFlag |
0x08100000 | ClearSoftwareClosedFlag |
0x08110000 | GetShellStatus |
0x08120000 | IsShutdownByBatteryEmpty |
0x08130000 | FormatSavedata |
0x08140000 | GetLegacyJumpProhibitedFlag |
0x08150040 | SetPlayHistoryRecordingMode |
0x0816.... | Abstraction for mcu::RTC::GetSystemClock |
0x0817.... | Abstraction for mcu::RTC::SetSystemClock |
0x08180040 | ConfigureNew3DSCPU |
GetSystemTime PTM Service "ptm:gets"Edit
Command Header | Description |
---|---|
0x04010000 | GetSystemTime |
SetSystemTime PTM Service "ptm:sets"Edit
Command Header | Description |
---|---|
0x00010080 | SetSystemTime |
PTM System_SaveDataEdit
Main article: PTM Savegame
During system boot PTM attempts to open the PTM savedata, if this fails it will repeatedly keep trying to open the archive. When opening the archive is failing due to savedata corruption, PTM eventually (during system boot) deletes the savedata then creates it again.
Savedata contents:
- "/Pedometer.dat"
- "/PlayHistory.dat" Filesize is 0xD5DE8.