NWMUDS:GetNodeInformationList

Request

Index Word	Description
0	Header code [0x001F0006]
1	(NetworkStructSize<<12) | 0x402
2	Input network struct buffer ptr
3	(Tag0BufSize<<12) | 0x802
4	Tag0 data buffer ptr
5	(Tag1BufSize<<12) | 0xC02
6	Tag1 data buffer ptr

The following is located 0x100-bytes after the beginning of the above command buffer:

Index Word	Description
0	(Size<<14) | 2
1	Ptr to output buffer, size is hard-coded to 0x280.

Response

Index Word	Description
0	Header code
1	Result code

Description

The sizes of the input/output buffers are hard-coded. The tag-data buffers begin at the OUI field in the tags(this data is from NWMUDS:RecvBeaconBroadcastData). Normally tag1buf is unused(all-zero), tag1 is only used when the crypt-size is larger than 0xFA. The decrypted data is byte-swapped to little-endian when copying to the output buffer.

While the input tag-data can be from arbitrary tags, the user-process normally uses OUI type 24/0x18 for tag0 and type 25/0x19 for tag1(when it exists).