IO Registers
Overview
Old3DS | A9/A11 | Category | Physaddr | Used by | Comments |
---|---|---|---|---|---|
Yes | A9 | CONFIG9 Registers | 0x10000000 | Boot9, Process9 | |
Yes | A9 | IRQ Registers | 0x10001000 | Boot9, Process9, Kernel9 | ARM9 Interrupt Masking |
Yes | A9 | NDMA Registers | 0x10002000 | Boot9, Process9 | DMA Engine |
Yes | A9 | TIMER Registers | 0x10003000 | Boot9, Process9 | |
Yes | A9 | CTRCARD Registers | 0x10004000 / 0x10005000 | Process9 | |
Yes | A9 | EMMC Registers | 0x10006000 / 0x10007000 | Boot9, Process9, NewKernel9Loader | 0x10007000 is normally not enabled on retail, all-zeros when read. |
Yes | A9 | PXI Registers | 0x10008000 | Boot9, Process9 | |
Yes | A9 | AES Registers | 0x10009000 | Boot9, Process9, NewKernel9Loader | |
Yes | A9 | SHA Registers | 0x1000A000 | Boot9, Process9, NewKernel9Loader | |
Yes | A9 | RSA Registers | 0x1000B000 | Boot9, Process9 | |
Yes | A9 | XDMA Registers | 0x1000C000 | Boot9, Kernel9 | CoreLink™ DMA-330 r0p0 (two channels). |
Yes | A9 | SPICARD Registers | 0x1000D800 | Process9 | |
Yes | A9 | CONFIG Registers | 0x10010000 | Process9 | |
Yes | A9 | PRNG Registers | 0x10011000 | Boot9, Process9 | Used as entropy-source for seeding random number generators. |
Yes | A9 | OTP Registers | 0x10012000 | Boot9, Kernel9, NewKernel9Loader | Top secret. |
Yes | A9 | ARM7 Registers | 0x10018000 | TwlProcess9 | Used to setup the ARM7 core for AGB/TWL |
Yes | A11/A9 | Debug WIFI SDIO Registers? | 0x10100000 | An SDIO controller is mapped here, NWM references this controller but doesn't have access to it. | |
Yes | A11/A9 | HASH Registers | 0x10101000 | Filesystem services | These registers function the same as the SHA Registers, with the exception of the FIFO being located at 0x10301000. |
Yes | A11/A9 | Y2R Registers | 0x10102000 | Camera Services | y2r |
Yes | A11/A9 | CSND Registers | 0x10103000 | TwlBg, Codec Services, CSND Services, DSP Services | Sound hardware. |
Yes | A11/A9 | LgyFb Registers | 0x10110000 | TwlBg | IO registers used to access legacy output framebuffer, as well as configure the upscaling filter. |
Yes | A11/A9 | LgyFb Registers | 0x10111000 | TwlBg | IO registers used to access legacy output framebuffer, as well as configure the upscaling filter. |
Yes | A11/A9 | Camera Registers | 0x10120000 | Camera Services | |
Yes | A11/A9 | Camera Registers | 0x10121000 | Camera Services | Mirror of 0x10120000? |
Yes | A11/A9 | WIFI Registers | 0x10122000 | NWM Services | WIFI SDIO bus registers |
Yes | A11/A9 | ? | 0x10123000 | NWM Services | WIFI? |
No | A11/A9 | MVD Registers | 0x10130000 | MVD Services | |
No | A11/A9 | MVD Registers | 0x10131000 | MVD Services | |
No | A11/A9 | MVD Registers | 0x10132000 | MVD Services | |
Yes | A11/A9 | CONFIG11 Registers | 0x10140000 | Process9, Boot11, Kernel11, TwlBg, DSP Services, NWM Services, SPI Services | Power management. |
Yes | A11/A9 | CONFIG11 Registers | 0x10141000 | Process9, Boot11, Kernel11, TwlBg, Codec Services, NWM Services, SPI Services, PDN Services | Power management |
Yes | A11/A9 | SPI Registers | 0x10142000 | TwlBg, SPI Services | |
Yes | A11/A9 | SPI Registers | 0x10143000 | TwlBg, dmnt Module | Debugger related? |
Yes | A11/A9 | I2C Registers | 0x10144000 | Boot11, Kernel11, TwlBg, I2C Services | 3DS I2C interface (MCU + Cameras + LCD) |
Yes | A11/A9 | CODEC Registers | 0x10145000 | TwlBg, Codec Services | |
Yes | A11/A9 | HID Registers | 0x10146000 | Boot9, Boot11, Kernel11, TwlBg, HID Services, dlp Services | See PAD. |
Yes | A11/A9 | GPIO Registers | 0x10147000 | Boot11, TwlBg, GPIO Services, DSP Services(v0) | |
Yes | A11/A9 | I2C Registers | 0x10148000 | TwlBg, I2C Services | 3DS I2C interface (Gyro + IR) |
Yes | A11/A9 | SPI Registers | 0x10160000 | Boot9, TwlBg, SPI Services | |
Yes | A11/A9 | I2C Registers | 0x10161000 | Boot11, TwlBg, I2C Services | TWL I2C interface (MCU + Cameras) |
Yes | A11/A9 | MIC Registers | 0x10162000 | MIC Services | |
Yes | A11/A9 | PXI Registers | 0x10163000 | Boot11, Kernel11, TwlBg, PXI Services | |
Yes | A11/A9 | NTRCARD Registers | 0x10164000 | Boot9, Process9 | |
Yes | A11/A9 | MP Registers | 0x10165000 | MP Services | |
Yes | A11/A9 | MP Registers | 0x10170000 | MP Services | NTR WIFI Registers, see GBATek. |
Yes | A11/A9 | MP Registers | 0x10171000 | MP Services | NTR WIFI Registers (mirror) |
Yes | A11/A9 | ? | 0x10172000 | ? | NTR WIFI Unused? |
Yes | A11/A9 | ? | 0x10173000 | ? | NTR WIFI Unused? |
Yes | A11/A9 | MP Registers | 0x10174000 | MP Services | NTR WIFI RAM |
Yes | A11/A9 | MP Registers | 0x10175000 | ? | NTR WIFI RAM |
Yes | A11/A9 | MP Registers | 0x10176000 | ? | NTR WIFI Registers (mirror) |
Yes | A11/A9 | MP Registers | 0x10177000 | ? | NTR WIFI Registers (mirror) |
Yes | A11/A9 | MP Registers | 0x10178000 - 0x10180000 | MP Services | NTR WIFI WS1 Region |
Yes | A11 | CDMA | 0x10200000 | Boot11, Kernel11 | CoreLink™ DMA-330 r0p0 (eight channels). Only used by bootrom on New3DS. |
Yes | A11 | ? | 0x10201000 | TwlBg | |
Yes | A11 | LCD Registers | 0x10202000 | TwlBg, Kernel11, GSP Services | |
Yes | A11 | DSP Registers | 0x10203000 | DSP Services | see the "DSi XpertTeak" section in no$gba help. |
Yes | A11 | 0x10204000 | |||
No | A11 | CDMA | 0x10206000 | NewKernel11 | CoreLink™ DMA-330 r1p2 (eight channels). This is the DMA engine actually being used by the New3DS ARM11 kernel. |
No | A11 | MVD Registers | 0x10207000 | MVD Services | New 3DS only? |
Yes | A11 | AXI | 0x1020F000 | TwlBg, GSP Services | CoreLink™ NIC-301 r1p0. |
Yes | A11 | DMA region | 0x10300000-0x10400000 | CDMA wants these addresses. Most pages in this region correspond to the same respective pages in the 0x10100000-0x10200000 region. The HASH FIFO register is located at 0x10301000 only. | |
Yes | A11 | GPU Registers | 0x10400000 | Boot11, Kernel11, GSP Services |
IO registers starting at physical address 0x10200000 are not accessible from the ARM9 (which includes all LCD/GPU registers). It seems IO registers below physical address 0x10100000 are not accessible from the ARM11 bus.
ARM11 kernel virtual address mappings for these registers varies for different builds. For ARM11 user mode applications you have:
physaddr = virtaddr - 0x1EC00000 + 0x10100000