GPIO Services
GPIO Service Names
| Service name | Permitted GPIO bitmasks |
|---|---|
| gpio:CDC | 0x48 |
| gpio:MCU | 0x48020 |
| gpio:HID | 0x4301 |
| gpio:NWM | 0x40020 |
| gpio:IR | 0xEC0 |
| gpio:NFC | 0x13000 |
| gpio:QTM | 0x20000 |
For the mapping between GPIO bitmasks and IRQs see: GPIO:BindInterrupt#Supported_values.
The commands for these services are identical.
The input bitmask for each command is masked with the above permission bitmask, if the result is non-zero an error is occurred.
GPIO Services
| Command Header | Description | Uses GPIO Regs |
|---|---|---|
| 0x0001.... | ?(u32 unk1,u32* ret) | 0x10147010, 0x10147020 |
| 0x00020080 | ?(u32 unk1,u32 unk2) | 0x10147010, 0x10147020 |
| 0x0003.... | ?(u32 unk1,u32* ret) | 0x10147010, 0x10147024 |
| 0x00040080 | ?(u32 unk1,u32 unk2) | 0x10147010, 0x10147024 |
| 0x0005.... | ?(u32 unk1,u32* ret) | 0x10147010, 0x10147024 |
| 0x00060080 | ?(u32 unk1,u32 unk2) | 0x10147010, 0x10147024 |
| 0x00070040 | GetGPIOData | 0x10147000, 0x10147010, 0x10147014, 0x10147020, 0x10147028 |
| 0x00080080 | SetGPIOData | 0x10147010, 0x10147014, 0x10147020, 0x10147028 |
| 0x00090082 | BindInterrupt | None |
| 0x000A0042 | UnbindInterrupt | None |
GPIO Bitmask
The bitmask used by the service commands determines which bits in the GPIO registers to access. The output value from GetGPIOData uses the same format as the bitmask: the values of bits in the output field are set to the value of GPIO data when those bits are set in the input bitmask.
| Bits in the bitmask | Register | Bits from register | Handled with GPIO:SetGPIOData |
|---|---|---|---|
| 0-2 (0x7) | 0x10147000 | 0-2 | No |
| 3-4 (0x18) | 0x10147010 | 0-1 | Yes |
| 5 (0x20) | 0x10147014 | 0 | Yes |
| 6-17 (0x3FFC0) | 0x10147020 | 0-11 | Yes |
| 18 (0x40000) | 0x10147028 | 0 | Yes |
GPIO Bits
| Bit | Bitmask | Accessible via GPIO service | Used by | Description |
|---|---|---|---|---|
| 0 | 0x1 | gpio:HID | HID-sysmodule | Used with HID PAD state. |
| 1 | 0x2 | None | Not known to be used by anything, with the latest system-version at least. | |
| 2 | 0x4 | None | Not known to be used by anything, with the latest system-version at least. | |
| 3 | 0x8 | gpio:CDC | ? | ? |
| 4 | 0x10 | None | Not known to be used by anything, with the latest system-version at least. | |
| 5 | 0x20 | gpio:MCU, gpio:NWM | ? | ? |
| 6 | 0x40 | gpio:CDC, gpio:IR | ? | ? |
| 7 | 0x80 | gpio:IR | Boot11 | ? |
| 8 | 0x100 | gpio:HID | ? | ? |
| 9 | 0x200 | gpio:HID, gpio:IR | HID-sysmodule and IR-sysmodule | Unknown, used with ir:rst. |
| 10 | 0x400 | gpio:IR | IR-sysmodule, Boot11 | IR send. 1 = IR LED enable, 0 = IR LED disable. |
| 11 | 0x800 | gpio:IR | IR-sysmodule | IR receive |
| 12 | 0x1000 | gpio:NFC | ? | ? |
| 13 | 0x2000 | gpio:NFC | ? | ? |
| 14 | 0x4000 | gpio:HID | HID-sysmodule | Used with HID PAD state. |
| 15 | 0x8000 | gpio:MCU | ? | ? |
| 16 | 0x10000 | gpio:NFC | ? | ? |
| 17 | 0x20000 | gpio:QTM | ? | ? |
| 18 | 0x40000 | gpio:MCU, gpio:NWM | NWM-sysmodule | Wifi enable. 1=Enabled, 0=Disabled. |