Talk:Gamecards

This could be confused for the augmented reality cards. I think they are called cartridges.--T3a 18:08, 8 April 2011 (CEST)

^ should at least be a redirect ( "Game Cartridges, Game Cart Hardware, Game Carts" )

• 90 00 00 00 00 00 00 00 ... => 45F80090 for SSFIV, C2FF0090 on Rayman3d.
• Is it just me or do these byte orders keep changing. 9000000000000000 corresponds with "C2FE0090" not "9000FEC2".
• "header command has some initial dummy bytes, and eventually responds with a 0x200 byte header.". Dummy bytes, Where? The redundant A500 cmds? --Jl12

You need to endian swap the data. 9000xxxx is the correct form. The upper bits specify information about the intended platform for the gamecard, and the lower bits specify the media size of the card.

There are dummy bytes in the response for each 16-byte command. In the wiki these dummy bytes have already been stripped. --Neimod 17:41, 3 June 2011 (CEST)

Could you post the size of the original header reply with the dummy bytes. I'm trying to inject logic ( send raw commands ) with a 3DS card. It works well up to the 3E 00 00 00 00 00 00 00 command, I get 'data' returned from the header packet as well but only 00 bytes. --Jl12

The size depends on what speed you are clocking out. Just keep reading until you get something that is non-zero. Also, what device are you using for reading out the data? --Neimod 09:09, 4 June 2011 (CEST)

http://pastebin.com/y22zZcZN - That's for 'Street Fighter IV 3D'. There's an NCCH header and cartridge ID. The same method returned x00 00... with a different cart, though. Not sure why there's a difference. I actually have it hooked up to a laptop, where a device over USB reads the pins and the 3DS cart is connected to it there. ( ie. the laptop acts as the 3DS. )

http://pastebin.com/38QxNGqn - That's the cart that was returning an empty header. ( "rayman 3D" ). Seems to work, now.

How did you actually decrypt the encrypted commands, Neimod?--Lazymarek9614 21:06, 1 November 2011 (CET)

Sorry, it is a little too soon to reveal that. --Neimod 02:00, 2 November 2011 (CET)

I think the 3dbrew members are one team, why do you want to hide it?--Lazymarek9614 21:23, 2 November 2011 (CET)

I see the two sides of the problem here Neimod and Lazymarek9614. This forum like many public homebrew forum,s are there to try to find a way to load Homebrew. Letting everyone know your progress on what you are doing lets people understand how the scene is performing and people who have the knowhow can possibly help. But the downside to this is if Nintendo gets the drift on what you trying to do, they have the advantage, they know how the 3DS better than anyone, so releasing data on some exploits and WIP could lead to Nintendo patching it before it is finalised. Thats the decision the homebrew devs have to make.