| Command Header
|
Available since system version
|
Description
|
| 0x000101C2
|
1.0.0-0
|
ReadCTRCARD_Cmd40
|
| 0x000201C2
|
1.0.0-0
|
WriteCTRCARD_Cmd41
|
| 0x00030102
|
1.0.0-0
|
ReadCTRCARD_Cmd42
|
| 0x00040102
|
1.0.0-0
|
WriteCTRCARD_Cmd44
|
| 0x00050102
|
1.0.0-0
|
Stubbed, only returns an error.
|
| 0x00060102
|
1.0.0-0
|
Stubbed, only returns an error.
|
| 0x00070000
|
1.0.0-0
|
Stubbed, only returns an error.
|
| 0x00080000
|
2.0.0-2
|
Initialization for the stuff used by the below commands.
|
| 0x00090000
|
2.0.0-2
|
Shutdown for the stuff used by the below commands.
|
| 0x000A0000
|
2.0.0-2
|
This writes 3 bytes to cmdreply[2], the SPICARD hw is used for this.
|
| 0x000B0000
|
2.0.0-2
|
This writes a max-size value to cmdreply[2].
|
| 0x000C0042
|
2.0.0-2
|
(size, ((size<<8) | 4), outbufptr) This copies the data from some buffer(size is restricted to the maxsize value also used by command 0x000B0000) to the FCRAM outbuf, when certain flags are set correctly.
|
| 0x000D0688
|
2.0.0-2
|
SPICARD related, to use this the arm9-access-control bit for SPICARD must be set in one of the currently running ARM11 processes.
|
| 0x000E0284
|
2.0.0-2
|
SPICARD related, to use this the arm9-access-control bit for SPICARD must be set in one of the currently running ARM11 processes.
|
| 0x000F0000
|
2.0.0-2
|
This reads the 0x200-byte NCSD header from the gamecard. Then the u8 from ncsdhdr+0x18B(partitionflags[3]) is copied to cmdreply[2].
|