QTM is the New_3DS system module in charge of handling head tracking. A maximum of two sessions can be opened for each QTM service.
Head tracking is not usable when any other process is using any of the cameras, QTM returns error 0xC8A18008 for this.
QTM services
| Command Header | Description |
|---|---|
| 0x00010080 | (u64 input) Writes an 0x30-byte output structure to the data starting at cmdreply[2]. |
| 0x00020080 | (u64 input) Writes an 0x40-byte output structure to the data starting at cmdreply[2]. |
| 0x00030000 | |
| 0x00040000 | |
| 0x00050040 | (u8 input) |
| 0x00060000 | Writes an output u8 to cmdreply[2]. |
The commands under this section are available for all QTM services except for "qtm:c".
QTM user service "qtm:u"
The commands available for this are exactly the same as the commands listed under the "QTM services" section.
QTM system service "qtm:s"
| Command Header | Description |
|---|---|
| 0x04010040 | (float input) |
| 0x04020000 | Writes float output to cmdreply[2]. |
| 0x04030000 | |
| 0x04040000 | |
| 0x04050040 | (u8 input) |
| 0x04060000 | Writes an u8 to cmdreply[2]. |
| 0x04070040 | (u8 input) |
| 0x040801C0 | |
| 0x04090000 | Writes an u8 to cmdreply[2]. |
| 0x040A0040 | (u8 input) |
See also the "QTM services" section.
QTM service "qtm:sp"
| Command Header | Description |
|---|---|
| 0x08010040 | (u8 input) |
| 0x08020000 | |
| 0x08030040 | (u8 input) |
| 0x08040000 |
This service has all of the commands listed under the "QTM services" section and the "qtm:s" section, in addition to the above commands.
This service is used by NS and GSP-module, hence no other processes can use this service.
QTM service "qtm:c"
| Command Header | Description |
|---|---|
| 0x00010000 | |
| 0x00020000 | |
| 0x00030040 | |
| 0x00040000 | Writes an output u8 to cmdreply[2]. |
| 0x00050040 | (u8 input) |
The commands for this service are separate from the commands under the "QTM services" section.