GPIO Registers
Jump to navigation
Jump to search
Registers
GPIO
Old3DS | Name | Address | Width |
---|---|---|---|
Yes | GPIO1_DATA | 0x10147000 | 1 |
Yes | GPIO2_DATA | 0x10147010 | 1 |
Yes | GPIO2_DIR | 0x10147011 | 1 |
Yes | GPIO2_INTCFG | 0x10147012 | 1 |
Yes | GPIO2_INTEN | 0x10147013 | 1 |
Yes | GPIO2_DATA2 | 0x10147014 | 2 |
Yes | GPIO3_DATA | 0x10147020 | 2 |
Yes | GPIO3_DIR | 0x10147022 | 2 |
Yes | GPIO3_INTCFG | 0x10147024 | 2 |
Yes | GPIO3_INTEN | 0x10147026 | 2 |
Yes | GPIO2_DATA2 | 0x10147028 | 2 |
Legacy RTC
Name | Address | Width | Description |
---|---|---|---|
RTC_CNT | 0x10147100 | 2 | Control register |
RTC_REG_STAT1 | 0x10147110 | 1 | Rtc status register 1 (command 0). Bitswapped |
RTC_REG_STAT2 | 0x10147111 | 1 | Rtc status register 2 (command 1). Bitswapped |
RTC_REG_CLKADJ | 0x10147112 | 1 | Rtc clock adjustment register (command 6). Bitswapped |
RTC_REG_FREE | 0x10147113 | 1 | The free general purpose rtc register (command 7). Bitswapped |
RTC_REG_TIME1 | 0x10147120 | 4 | Byte-wise bit-swapped (bit7 is bit0, etc.) BCD RTC (byte0 = seconds, byte1 = minutes, byte2 = hours, byte3 = day of week) |
RTC_REG_TIME2 | 0x10147124 | 4 (3?) | Day, month and year all byte-wise bit-swapped |
RTC_REG_ALRMTIM1 | 0x10147130 | 4 (3?) | Rtc alarm time register 1 (command 4). Byte-wise bit-swapped |
RTC_REG_ALRMTIM2 | 0x10147134 | 4 (3?) | Rtc alarm time register 2 (command 5). Byte-wise bit-swapped |
RTC_REG_COUNT | 0x10147140 | 4 (3?) | Rtc dsi counter register (ex command 0). Byte-wise bit-swapped |
RTC_REG_FOUT1 | 0x10147150 | 1 | Rtc dsi fout register 1 (ex command 1). Bitswapped |
RTC_REG_FOUT2 | 0x10147151 | 1 | Rtc dsi fout register 2 (ex command 2). Bitswapped |
RTC_REG_ALRMDAT1 | 0x10147160 | 4 (3?) | Rtc dsi alarm date register 1 (ex command 4). Byte-wise bit-swapped |
RTC_REG_ALRMDAT2 | 0x10147164 | 4 (3?) | Rtc dsi alarm date register 2 (ex command 5). Byte-wise bit-swapped |
Descriptions
GPIO
GPIO pins
GPIO services bitmasks use this table, in that order:
Bit | IRQ ID | Description |
---|---|---|
0 | ? | GPIO1_0 (?) |
1 | 0x63 | Touch Pen down |
2 | 0x60 | Shell closed |
0 | 0x64 | Headphones inserted |
1 | 0x66 | GPIO2_1 (?) |
DATA2.0 | - | GPIO2_DATA2_0 (wifi related?) |
0 | 0x68 | C-stick |
1 | 0x69 | IrDA |
2 | 0x6A | Gyro |
3 | 0x6B | GPIO3_3 (?) |
4 | 0x6C | GPIO3_4 (?) |
5 | 0x6D | GPIO3_5 (?) |
6 | 0x6E | GPIO3_6 (?) |
7 | 0x6F | GPIO3_7 (?) |
8 | 0x70 | GPIO3_8 (?) |
9 | 0x71 | MCU |
10 | 0x72 | NFC |
11 | 0x73 | GPIO3_11 (?) |
DATA2.0 | - | GPIO3_DATA2_0 (wifi related?) |
GPIOn_DATA
Pin values, one bit per pin.
GPIOn_DIR
Pin directions for GPIO2 and GPIO3, one bit per pin.
Value | Description |
---|---|
0 | Input |
1 | Output |
GPIOn_INTCFG
Interrupt configuration for GPIO2 and GPIO3 pins (not the extra ones), one bit per pin.
Value | Description |
---|---|
0 | Falling edge |
1 | Rising edge |
GPIOn_INTEN
Interrupt enable bits for GPIO2 and GPIO3 pins (not the extra ones), one bit per pin.
Value | Description |
---|---|
0 | Interrupt disabled |
1 | Interrupt enabled |
GPIOn_DATA2
Extra pins for GPIO2 and GPIO3 (one bit each). These two pins, in total, are not bound to any IRQ and are not configurable.
Default values
After bootrom initialization, these are the values of the registers:
Address | Value |
---|---|
0x10147000 | 0x0003 |
0x10147010 | 0x00000002 |
0x10147014 | 0x0000 |
0x10147020 | 0x00000DFB |
0x10147024 | 0x00000000 |
0x10147028 | 0x0000 |
Legacy RTC
RTC_CNT (0x10147100)
Bit | Description |
---|---|
0 | Latch STAT1 |
1 | Latch STAT2 |
2 | Latch CLKADJ |
3 | Latch FREE |
4 | Latch TIME |
5 | Latch ALRMTIM1 |
6 | Latch ALRMTIM2 |
7 | Latch COUNT |
8 | Latch FOUT1 |
9 | Latch FOUT2 |
10 | Latch ALRMDAT1 |
11 | Latch ALRMDAT2 |
12 | ARM7 Busy? This may be chipselect |
13 | ARM7 write command received? (writing 1 clears it seems) |
14 | ARM7 read command recieved? (writing 1 clears it seems) |
15 | DS SIO SI pin (rtc irq pin) |