GPU/Shader Instruction Set

Overview

A compiled shader binary is comprised of two parts : the main instruction sequence and the operand descriptor table. These are both sent to the GPU around the same time but using separate GPU Commands. Instructions (such as format 1 instruction) may reference operand descriptors. When such is the case, the operand descriptor ID is the offset, in words, of the descriptor within the table. Both instructions and descriptors are coded in little endian.

Instruction formats

Format 1 : (used for register instructions)

Offset	Size	Description
0x0	0x6	Operand descriptor ID (DESC)
0x6	0x6	Source 1 register (SRC2)
0xC	0x6	Source 2 register (SRC1)
0x12	0x2	Flags
0x24	0x2	Destination register (DST)
0x1A	0x6	Opcode

Format 2 : (used for flow control instructions)

Offset	Size	Description
0x0	0x8	Number of instructions ? (NUM)
0x8	0x10?	Destination offset (DST)
0x1A	0x6	Opcode

Instructions

Opcode	Format	Name	Description
0x01	1	DP3	Computes dot product on 3-component vectors; DST = SRC1.SRC2
0x02	1	DP4	Computes dot product on 4-component vectors; DST = SRC1.SRC2
0x13	1	MOV	Moves value; DST = SRC1
0x24	1	CALL	Jumps to DST and executes NUM instructions
0x21	1	END2	?
0x22	1	END1	?

Operand descriptors

Offset	Size	Description
0x0	0x4	Destination component mask. Bit 3 = x, 2 = y, 1 = z, 0 = w.
0x5	0x8	Source 1 component selector
0x14	0x8	Source 2 component selector
0x1F	0x1	Flag

Component selector :

Offset	Size	Description
0x0	0x2	Component 3 value
0x2	0x2	Component 2 value
0x4	0x2	Component 1 value
0x6	0x2	Component 0 value

Value	Component
0x0	x
0x1	y
0x2	z
0x3	w

The component selector enables swizzling. For example, component selector 0x1B is equivalent to .xyzw, while 0x55 is equivalent to .yyyy.