Socket Services
Revision as of 21:06, 20 February 2016 by Yellows8 (talk | contribs) (→Socket user service "soc:U")
Socket user service "soc:U"
| Command Header | Available since system-version | Description |
|---|---|---|
| 0x00010044 | InitializeSockets | |
| 0x000200C2 | socket | |
| 0x00030082 | listen | |
| 0x00040082 | accept | |
| 0x00050084 | bind | |
| 0x00060084 | connect | |
| 0x00070104 | recvfrom_other | |
| 0x00080102 | recvfrom | |
| 0x00090106 | sendto_other | |
| 0x000A0106 | sendto | |
| 0x000B0042 | close | |
| 0x000C0082 | shutdown | |
| 0x000D0082 | gethostbyname | |
| 0x000E00C2 | gethostbyaddr | |
| 0x000F0106 | getaddrinfo | |
| 0x00100102 | getnameinfo | |
| 0x00110102 | getsockopt | |
| 0x00120104 | setsockopt | |
| 0x001300C2 | fcntl | |
| 0x00140084 | poll | |
| 0x00150042 | sockatmark | |
| 0x00160000 | gethostid | |
| 0x00170082 | getsockname | |
| 0x00180082 | getpeername | |
| 0x00190000 | ShutdownSockets | |
| 0x001A00C0 | GetNetworkOpt | |
| 0x001B0040 | ICMPSocket | |
| 0x001C0104 | ICMPPing | |
| 0x001D0040 | ICMPCancel | |
| 0x001E0040 | ICMPClose | |
| 0x001F0040 | GetResolverInfo | |
| 0x00200146 | ? | |
| 0x00210002 | CloseSockets | |
| 0x00220040 | (int sockfd) Might be the inverse of command 0x00230040? | |
| 0x00230040 | (int sockfd) | |
| 0x100100C0 | ? | ? |
| 0x10030142 | ? | ? |
| 0x10050084 | ? | ? |
| 0x10070102 | ? | ? |
Socket privileged service "soc:P"
| Command Header | Description |
|---|---|
| 0x00010084 | InitializeSockets |
| 0x00020000 | FinalizeSockets |
| 0x000300C2 | SetNetworkOpt |
| 0x00040040 | CloseSocketsForProcess |
| 0x000500C0 | |
| 0x00060000 | gethostid |
| 0x00070000 | |
| 0x00080000 | |
| 0x00090000 | StopInitializeSockets |
struct sockaddr
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x1 | Total size of the entire sockaddr buffer. |
| 0x1 | 0x1 | u8 sa_family |
| 0x2 | sockaddr_totalsize-0x2 | sa_data[] |
The total buffer size is 0x8, for family AF_INET value 2. AF_INET6 seems to be value 23, the total sockaddr size for this is 0x1C. The max sockaddr buffer size which the socket module can handle is size 0x1C.
These socket services(and defines/structures) seem to be based on the Wii sockets?
Socket module errors
| Error | Description |
|---|---|
| 0xC8A0700B | SOCU:InitializeSockets returns this when the specified PID was already used with SOCU:InitializeSockets(since the PID was found in SOC module state table). |
| 0xD860700A | SOCU:InitializeSockets returns this when the PID table is already full(32 processes max). |
Socket module static buffers
This is the list of the known thread static buffers in use for SOC:u and the commands using those.
| buffer ID | commands |
|---|---|
| 0 | bind,connect |
| 1 | sendto_other,sendto |
| 2 | sendto |
| 5-7 | getaddrinfo |
| 8 | getnameinfo |
| 9 | setsockopt |
| 10 | poll |
IPV6
It seems that Nintendo planned ahead and included IPv6 support to some extent in their code. Name resolution functions support IPv6 (such as getnameinfo), but socket doesn't.
The ipv6 sockaddr size is 0x1C and is required for some IPC commands, even when using sockaddr_in which in reality is of size 8. The sockaddr_in6 struct is the following:
struct in6_addr
{
uint8_t s6_addr[16];
};
struct sockaddr_in6
{
sa_family_t sin6_family;
in_port_t sin6_port;
struct in6_addr sin6_addr;
u32 sin6_flowinfo; // Not confirmed
u32 sin6_scope_id; // Not confirmed
};