NWMEXT:ControlWirelessEnabled
Jump to navigation
Jump to search
Request
| Index Word | Description |
|---|---|
| 0 | Header code [0x00080040] |
| 1 | u8 Flag: 0 = enable, 1 = disable. |
Response
| Index Word | Description |
|---|---|
| 0 | Header code |
| 1 | Result code |
Description
This controls whether the wireless hardware is disabled or enabled(Home Menu displays "Disabled" for network status with the former). This is used by Home Menu for the wireless(Wifi+NFC) enable/disable option under Home Menu settings, for New3DS systems.
NWM module just verifies state fields, and uses SRV:PublishToSubscriber with notificationID=0x206 and flags=0x1 for this NWM command. The input value for this NWMEXT command is only used for verifying with NWM state, nothing more.
NWM itself is subscribed to notificationID=0x206. On Old3DS systems, mcu-module publishes that notification when handling the wireless slider interrupt, and this command isn't used.