DSP:LoadComponent
Jump to navigation
Jump to search
Request
| Index Word | Description |
|---|---|
| 0 | Header code [0x001100C2] |
| 1 | Size |
| 2 | Program Mask (observed 0x00FF) (Program ram blocks the component should be loaded into) |
| 3 | Data Mask (observed 0x00FF) (Data ram blocks the component should be loaded into) |
| 4 | (Size << 4) | 0xA |
| 5 | Component Buffer |
Response
| Index Word | Description |
|---|---|
| 0 | Header code [0x00110082] |
| 1 | Result code |
| 2 | u8, Component Loaded (0 = not loaded, 1 = loaded) |
| 3 | (Size << 4) | 0xA |
| 4 | Component Buffer |
Description
This requires RSA-signed DSP firmware specified via the input buffer for this command, the firmware data is eventually written to DSPmem+0(0x1FF00000). This has been observed to call a subroutine which calls a string named "synthe".