APT:CancelParameter
Revision as of 03:55, 22 November 2015 by Steveice10 (talk | contribs)
Request
| Index Word | Description |
|---|---|
| 0 | Header code [0x000F0100] |
| 1 | u8, Check Sender (0 = don't check, 1 = check) |
| 2 | Sender AppID |
| 3 | u8, Check Receiver (0 = don't check, 1 = check) |
| 4 | Receiver AppID |
Response
| Index Word | Description |
|---|---|
| 0 | Header code |
| 1 | Result code |
| 2 | u8, Status (0 = failure due to no parameter data being available, or the above enabled fields don't match the fields in NS state, 1 = success) |
Description
When parameter data is available, and when the above specified fields match the ones in NS state (for the ones where the checks are enabled), this clears the flag which indicates that parameter data is available (same flag cleared by APT:ReceiveParameter).