MVDSTD:GetConfig
Request
| Index Word | Description |
|---|---|
| 0 | Header code [0x001D0042] |
| 1 | Size, normally 0x11C. |
| 2 | (Size<<4) | 12 |
| 3 | Output data ptr |
Response
| Index Word | Description |
|---|---|
| 0 | Header code |
| 1 | Resultcode |
Structure
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | Type, see below. |
| 0x0C | 0x4 | Video width. |
| 0x10 | 0x4 | Video height. |
| 0x14 | 0x4 | Input data physical address, only set for "MJPEG". |
| 0x40 | 0x4 | 0x0 for "MJPEG", 0x1 for H.264. |
| 0x4C | 0x4 | Video height, only set for H.264. |
| 0x50 | 0x4 | Video width, only set for H.264. |
| 0x5C | 0x4 | Video width. |
| 0x60 | 0x4 | Video height. |
| 0x64 | 0x4 | Output data physical address. |
| 0x68 | 0x4 | Output data physical address, only set for "MJPEG". |
The size of this structure is fixed to 0x11C-bytes. The user process does the LINEAR-mem vaddr->physaddr conversion for the above physaddrs, when modifying the config struct before using MVDSTD:SetConfig.
See here regarding "MJPEG". For "MJPEG", the output frame is split into two images via the two output physaddrs.
Types:
| Type value | Mode | Description |
|---|---|---|
| 0x00000002 | Color conversion | ? |
| 0x00000003 | Video processing | ? |
| 0x00000005 | Video processing | ? |
| 0x00000006 | Color conversion | ? |
| 0x00000007 | Color conversion | ? |
| 0x00000008 | Color conversion | ? |
| 0x00010001 | Color conversion | "MJPEG" (yuyv422 -> <out color format>) |
| 0x00020000 | Color conversion | ? |
| 0x00020001 | Video processing | H.264 |
| 0x00020002 | ? | ? |
| 0x00080000 | Video processing | ? |
| 0x00080009 | Video processing | ? |
| 0x00180009 | Video processing | ? |
Description
For this command, MVD module DMAs 0x11C-bytes from a MVD state structure to the above output buffer.