Difference between revisions of "GPIO Services"
Jump to navigation
Jump to search
| Line 67: | Line 67: | ||
| 0x10147000, 0x10147010, 0x10147014, 0x10147020, 0x10147028 | | 0x10147000, 0x10147010, 0x10147014, 0x10147020, 0x10147028 | ||
|- | |- | ||
| − | | | + | | 0x00080080 |
| SetIRGPIO(u32 unk1,u32 unk2) | | SetIRGPIO(u32 unk1,u32 unk2) | ||
| 0x10147010, 0x10147014, 0x10147020, 0x10147028 | | 0x10147010, 0x10147014, 0x10147020, 0x10147028 | ||
Revision as of 13:01, 19 July 2016
GPIO Service Names
| Service name | Permitted interrupts bitmasks |
|---|---|
| gpio:CDC | 0x48 |
| gpio:MCU | 0x48020 |
| gpio:HID | 0x4301 |
| gpio:NWM | 0x40020 |
| gpio:IR | 0xEC0 |
| gpio:NFC | 0x13000 |
| gpio:QTM | 0x20000 |
For the mapping between interrupts bitmasks and IRQs see: GPIO:BindInterrupt#Supported_values.
The commands for these services are identical.
GPIO Services
| Command Header | Description | Uses GPIO Regs |
|---|---|---|
| 0x0001.... | ?(u32 unk1,u32* ret) | 0x10147010, 0x10147020 |
| 0x00020080 | ?(u32 unk1,u32 unk2) | 0x10147010, 0x10147020 |
| 0x0003.... | ?(u32 unk1,u32* ret) | 0x10147010, 0x10147024 |
| 0x00040080 | ?(u32 unk1,u32 unk2) | 0x10147010, 0x10147024 |
| 0x0005.... | ?(u32 unk1,u32* ret) | 0x10147010, 0x10147024 |
| 0x00060080 | ?(u32 unk1,u32 unk2) | 0x10147010, 0x10147024 |
| 0x00070040 | GetIRGPIO(u32 unk1,u32* ret) | 0x10147000, 0x10147010, 0x10147014, 0x10147020, 0x10147028 |
| 0x00080080 | SetIRGPIO(u32 unk1,u32 unk2) | 0x10147010, 0x10147014, 0x10147020, 0x10147028 |
| 0x00090082 | BindInterrupt | None |
| 0x000A0042 | UnbindInterrupt | None |