FIRM

Overview

This is the file format for the 3DS' Firmware, it contains four 'sections' of ARM code (ARM9 and ARM11). The firmware sections are not encrypted in the FIRM format.

The ARM9 section contains the ARM9 kernel and the ARM9 process(exheader process name is "Process9"). The ARM11 section(s) contains the ARM11 kernel, and the ARM11 process(es). For NATIVE_FIRM/SAFE_MODE_FIRM these ARM11 processes are sm, fs, pm, loader, and pxi. Normally the 4th section is not used. The code loaded from FIRM is constantly running on the system until another FIRM is launched. The ARM11 kernel is hard-coded to always decompress the FIRM ARM11 modules ExeFS .code, the exheader compression bit is not checked.

FIRM Header

OFFSET	SIZE	DESCRIPTION
0x000	4	Magic 'FIRM'
0x004	4	Reserved1
0x008	4	ARM11 Entrypoint
0x00C	4	ARM9 Entrypoint
0x010	0x030	Reserved2
0x040	0x0C0 (0x030*4)	Firmware Section Headers
0x100	0x100	RSA-2048 signature of the FIRM header, using SHA-256.

Firmware Section Headers

OFFSET	SIZE	DESCRIPTION
0x000	4	Offset
0x004	4	Address
0x008	4	Size
0x00C	4	Firmware Type ('0'=ARM9/'1'=ARM11)
0x010	0x020	SHA-256 Hash of Firmware Section

NATIVE_FIRM and SAFE_MODE_FIRM

NATIVE_FIRM is the FIRM which is installed to the NAND firm partitions, which is loaded by bootrom. SAFE_MODE_FIRM and NATIVE_FIRM for the initial versions are exactly the same, except for the system core version fields. SAFE_MODE is used for running the System Updater.

TWL_FIRM and AGB_FIRM

TWL_FIRM handles DS(i) backwards compatibility, while AGB_FIRM handles running GBA VC titles. The ARM9 FIRM section for TWL_FIRM and AGB_FIRM are exactly the same(for TWL_FIRM and AGB_FIRM versions which were updated with the same system-update).

TWL_FIRM

The 3DS-mode ARM9 core seems to switch into DSi-mode(for running DSi-mode ARM9 code) by writing to a PDN register(this changes the memory layout to DSi-mode / etc, therefore this register poke *must* be executed from ITCM). This is the final 3DS-mode register poke before the ARM9 switches into DSi-mode. It's unknown how exactly DS(i)-mode ARM7 code is run. Trying to read from the exception-vector region(address 0x0) under this DSi-mode ARM7 seems to only return 0x00/0xFF data. Also note that this DSi-mode ARM7 runs code(stored in TWL_FIRM) which pokes some DSi-mode registers that on the DSi were used for disabling access to the DSi bootROMs, however these registers do not affect the 3DS DSi-mode ARM9/ARM7 "bootrom" region(exceptionvector region + 0x8000) at all.

For shutting down the system(?), TWL_FIRM writes u8 value 8 to I2C MCU register 0x20. For returning to 3DS-mode, TWL_FIRM writes value 4 to that MCU register to trigger a hardware system reboot.

FIRM Launch Parameters

The FIRM-launch parameters structure is located at FCRAM+0, size 0x1000-bytes. The ARM11-kernel copies this structure elsewhere, then clears the 0x1000-bytes at FCRAM+0.

OFFSET	SIZE	DESCRIPTION
0x400	0x1	This can be used for overriding the default FCRAM memory-regions allocation sizes(APPLICATION, SYSTEM, and BASE).