Difference between revisions of "GPU/External Registers"
| Line 99: | Line 99: | ||
These 3 registers are used by [[GX_Commands|GX command]] 1. | These 3 registers are used by [[GX_Commands|GX command]] 1. | ||
| + | |||
| + | == 0x1EF00010 == | ||
| + | {| class="wikitable" border="1" | ||
| + | ! Register address | ||
| + | ! Description | ||
| + | |- | ||
| + | | 0x1EF000X0 | ||
| + | | Buffer physical address>>3 | ||
| + | |- | ||
| + | | 0x1EF000X4 | ||
| + | | Associated buffer physical address>>3 | ||
| + | |- | ||
| + | | 0x1EF000X8 | ||
| + | | Buffer size | ||
| + | |- | ||
| + | | 0x1EF000XC | ||
| + | | The low u16 for this register is overwritten by the GX command u16 parameter | ||
| + | |} | ||
| + | |||
| + | These registers are used by [[GX_Commands|GX command]] 2. 0x1EF00010 is used for the GX command buf0 parameters, while 0x1EF00020 is used for the GX command buf1 parameters. | ||
== Framebuffers == | == Framebuffers == | ||
Revision as of 21:13, 30 January 2013
Map
- 0x1EF00400 is the top screen
- 0x1EF00500 is the bottom screen
Init Values from nngxInitialize for Top Screen
- 0x1EF00400 = 0x1C2
- 0x1EF00404 = 0xD1
- 0x1EF00408 = 0x1C1
- 0x1EF0040C = 0x1C1
- 0x1EF00410 = 0
- 0x1EF00414 = 0xCF
- 0x1EF00418 = 0xD1
- 0x1EF0041C = 0x1C501C1
- 0x1EF00420 = 0x10000
- 0x1EF00424 = 0x19D
- 0x1EF00428 = 2
- 0x1EF0042C = 0x1C2
- 0x1EF00430 = 0x1C2
- 0x1EF00434 = 0x1C2
- 0x1EF00438 = 1
- 0x1EF0043C = 2
- 0x1EF00440 = 0x1960192
- 0x1EF00444 = 0
- 0x1EF00448 = 0
- 0x1EF0045C = 0x19000F0
- 0x1EF00460 = 0x1c100d1
- 0x1EF00464 = 0x1920002
- 0x1EF00470 = 0x80340
- 0x1EF0049C = 0
More Init Values from nngxInitialize for Top Screen
- 0x1EF00468 = 0x18300000, later changed by GSP module when updating state, framebuffer
- 0x1EF0046C = 0x18300000, later changed by GSP module when updating state, framebuffer
- 0x1EF00494 = 0x18300000
- 0x1EF00498 = 0x18300000
- 0x1EF00478 = 1, doesn't stay 1, read as 0
- 0x1EF00474 = 0x10501
0x1EF00X5C
| Bit | Description |
|---|---|
| 15-0 | Framebuffer width? |
| 31-16 | Framebuffer height? |
This register might control the framebuffer dimensions, however writing to this doesn't affect the displayed LCD image.
0x1EF00X78
| Bit | Description |
|---|---|
| 0 | LCD framebuffer to display (0=first, 1=second) |
| 7-1 | ? |
| 31-8 | Unused |
0x1EF00X90
| Bit | Description |
|---|---|
| 3-0 | ? |
| 7-4 | Controls the framebuffer dimensions and/or color format |
| 31-7 | ? |
This register controls how the LCD framebuffer is displayed.
0x1EF018E0
| Register address | Description |
|---|---|
| 0x1EF018E0 | Buffer Size>>3 |
| 0x1EF018E8 | Buffer physical address>>3 |
| 0x1EF018F0 | Writing value 1 here triggers GPU processing for the specified buffer |
These 3 registers are used by GX command 1.
0x1EF00010
| Register address | Description |
|---|---|
| 0x1EF000X0 | Buffer physical address>>3 |
| 0x1EF000X4 | Associated buffer physical address>>3 |
| 0x1EF000X8 | Buffer size |
| 0x1EF000XC | The low u16 for this register is overwritten by the GX command u16 parameter |
These registers are used by GX command 2. 0x1EF00010 is used for the GX command buf0 parameters, while 0x1EF00020 is used for the GX command buf1 parameters.
Framebuffers
| Address | Description |
|---|---|
| 0x1EF00468 | Main LCD, first framebuffer for 3D left |
| 0x1EF0046C | Main LCD, second framebuffer for 3D left |
| 0x1EF00494 | Main LCD, first framebuffer for 3D right |
| 0x1EF00498 | Main LCD, second framebuffer for 3D right |
| 0x1EF00568 | Sub LCD, first framebuffer |
| 0x1EF0056C | Sub LCD, second framebuffer |
The above framebuffer registers contains the physical address for each framebuffer, normally located in FCRAM in the application's GSP heap.
These LCD framebuffers normally contain the last rendered frames from the GPU. The color format is BGR8. The framebuffers are drawn from left-to-right, instead of top-to-bottom.(Thus the beginning of the framebuffer is drawn starting at the left side of the screen)
Both of the 3D screen left/right framebuffers are displayed regardless of the 3D slider's state, normally when the 3D slider's state is set to "off" the left/right framebuffer addresses are set to the same physical address.