Difference between revisions of "SSL Services"
(→SSLOpt) |
|||
| Line 194: | Line 194: | ||
| 9 | | 9 | ||
| Disables server cert verification when set. | | Disables server cert verification when set. | ||
| + | |- | ||
| + | | 11 | ||
| + | | Use TLS 1.0. | ||
|} | |} | ||
This is the options field initialized during [[SSLC:CreateContext]], and cleared via [[SSLC:ContextClearOpt]]. When the context is initially created, the options field initially has bitmask 0x1B set(besides the additional bits specified via [[SSLC:CreateContext]]). | This is the options field initialized during [[SSLC:CreateContext]], and cleared via [[SSLC:ContextClearOpt]]. When the context is initially created, the options field initially has bitmask 0x1B set(besides the additional bits specified via [[SSLC:CreateContext]]). | ||
| − | |||
| − | |||
= Error codes = | = Error codes = | ||
Revision as of 05:08, 30 March 2016
SSL service "ssl:C"
| Command Header | Available since system-version | Available from service-sessions | Description |
|---|---|---|---|
| 0x00010002 | 1.0.0-0 | Basically main-only | Initialize |
| 0x000200C2 | 1.0.0-0 | CreateContext | |
| 0x00030000 | 1.0.0-0 | CreateRootCertChain | |
| 0x00040040 | 1.0.0-0 | DestroyRootCertChain | |
| 0x00050082 | 1.0.0-0 | Main-only | AddTrustedRootCA |
| 0x00060080 | 1.0.0-0 | Main-only | RootCertChainAddDefaultCert |
| 0x00070080 | 1.0.0-0 | Main-only | RootCertChainRemoveCert |
| 0x00080000 | 1.0.0-0 | This writes an output u32 to cmdreply[2](created context handle). | |
| 0x00090040 | 1.0.0-0 | (u32 handle for a context) This is used for destroying a context created by command 0x00080000. | |
| 0x000A0082 | 1.0.0-0 | Main-only | (u32 contexthandle, u32 size, ((Size<<4) | 10), inbufptr) Writes the output cert-context-handle to cmdreply[2]. This uses a context created by command 0x00080000. This adds the specified cert to this context. |
| 0x000B0080 | 1.0.0-0 | Main-only | (u32 contexthandle, u8 inval2) Writes an output cert-context-handle to cmdreply[2]. This uses a context created by command 0x00080000. This just returns error 0xD8A0B83D eventually. |
| 0x000C0080 | 1.0.0-0 | Main-only | (u32 contexthandle, u32 certcontexthandle) This uses a context created by command 0x00080000. This removes the specified cert from the context. |
| 0x000D0084 | 1.0.0-0 | Main-only | OpenClientCertContext |
| 0x000E0040 | 1.0.0-0 | Main-only | OpenDefaultClientCertContext |
| 0x000F0040 | 1.0.0-0 | Main-only | CloseClientCertContext |
| 0x00100000 | 1.0.0-0 | All | GatherEntropy |
| 0x00110042 | 1.0.0-0 | All | GenerateRandomData |
| 0x00120042 | 1.0.0-0 | InitializeConnectionSession | |
| 0x00130040 | 1.0.0-0 | Context-only | StartConnection |
| 0x00140040 | 1.0.0-0 | Context-only | StartConnectionGetOut |
| 0x00150082 | 1.0.0-0 | Context-only | Read |
| 0x00160082 | 1.0.0-0 | Context-only | (u32 contexthandle, u32 size, ((Size<<4) | 12), outbufptr) Writes an output u32 to cmdreply[2]. |
| 0x00170082 | 1.0.0-0 | Write | |
| 0x00180080 | 1.0.0-0 | ContextSetRootCertChain | |
| 0x00190080 | 1.0.0-0 | Context-only | ContextSetClientCert |
| 0x001A0080 | 1.0.0-0 | Context-only | (u32 contexthandle, u32 handle) This writes a context handle created by command 0x00080000 into the session context. |
| 0x001B0080 | 1.0.0-0 | Context-only | ContextClearOpt |
| 0x001C00C4 | 1.0.0-0 | Context-only | (u32 contexthandle, u32 size0, u32 size1, ((Size0<<4) | 12), outbufptr0, ((Size1<<4) | 12), outbufptr1) This copies two strings to the specified output buffers, each string is only copied if it was successfully loaded. The out sizes include the nul-terminator. |
| 0x001D0040 | 1.0.0-0 | Context-only | (u32 contexthandle) Writes an output u32 from the context state to cmdreply[2]. |
| 0x001E0040 | 1.0.0-0 | All | DestroyContext |
| 0x001F0082 | 1.0.0-0 | Context-only | ContextInitSharedmem |
| 0x00200082 | 1.0.0-0 | Context-only | (contexthandle, u32 size, ((Size<<4) | 10), inbufptr) Inbuf seems to be a cert? |
Going by strings in the SSL sysmodule it appears the sysmodule uses RSA BSAFE(like certain other 3DS software), this is also likely where the "ssl:C" name comes from(RSA BSAFE "SSL-C").
Similar to HTTPC, each SSL context is used with a dedicated service session which gets opened after creating that context. Following creating the context + opening the service session, SSLC:InitializeConnectionSession is used from that service session for that context. Afterwards, all commands which require a handle for this context are done with this dedicated service session.
Internally there's a separate object vtable used with the above SSLC commands, for the main session(where SSLC:InitializeConnectionSession wasn't used), and context sessions where SSLC:InitializeConnectionSession was used. Error 0xD960BBF4 will be returned if a command was used with the wrong session type.
Like some other commands, 0x001F0082 and 0x00200082 are not used by HTTP-sysmodule.
Among commands 0x00180080..0x001B0080 none of them are completely mandatory. However, with the default settings at bare minimum a RootCertChain needs selected otherwise an untrusted-RootCA error will trigger eventually.
It's unknown whether TLS server->client connections are supported.
Commands 0x00080000..0x000C0080
These appear to be basically the same as the RootCertChain 0x00030000..0x00070080 commands, except with a different context. The equivalent of RootCertChainAddDefaultCert in this set(0x000B0080) is not usable however.
It's unknown what this context is actually used for.
SSLOpt
| Bit(s) | Description |
|---|---|
| 9 | Disables server cert verification when set. |
| 11 | Use TLS 1.0. |
This is the options field initialized during SSLC:CreateContext, and cleared via SSLC:ContextClearOpt. When the context is initially created, the options field initially has bitmask 0x1B set(besides the additional bits specified via SSLC:CreateContext).
Error codes
| Error code | Description |
|---|---|
| 0xD8A0B814 | Server cert verification failed since the RootCA isn't trusted. |
| 0xD8A0B836 | The specified RootCertChain handle was not found in the linked-list. |