Difference between revisions of "MicroSD Management"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
This uses the SMB protocol. When first starting the application it will ask for an username, password, and workgroup name, for accessing the New3DS with from a PC. These settings are then stored in savedata, so that info doesn't need setup each time the application is launched. | This uses the SMB protocol. When first starting the application it will ask for an username, password, and workgroup name, for accessing the New3DS with from a PC. These settings are then stored in savedata, so that info doesn't need setup each time the application is launched. | ||
| + | |||
| + | =System Savedata= | ||
| + | * "/Mcopy.dat" Filesize is (at least?) 0x68-bytes, contains the stored settings. | ||
| + | |||
| + | Savefile structure: | ||
| + | {| class="wikitable" border="1" | ||
| + | ! Offset | ||
| + | ! Size | ||
| + | ! Description | ||
| + | |- | ||
| + | | 0x0 | ||
| + | | 0x4 | ||
| + | | u32, unknown. Usually 1? | ||
| + | |- | ||
| + | | 0x4 | ||
| + | | 0x4 | ||
| + | | u32, unknown. Usually 1? | ||
| + | |- | ||
| + | | 0x8 | ||
| + | | 0x20 | ||
| + | | char[] wifi AP SSID | ||
| + | |- | ||
| + | | 0x28 | ||
| + | | 0x10 | ||
| + | | char[] SMB device name | ||
| + | |- | ||
| + | | 0x38 | ||
| + | | 0x10 | ||
| + | | char[] SMB workgroup name | ||
| + | |- | ||
| + | | 0x48 | ||
| + | | 0x10 | ||
| + | | char[] SMB username | ||
| + | |- | ||
| + | | 0x58 | ||
| + | | 0x10 | ||
| + | | char[] SMB password | ||
| + | |} | ||
Revision as of 19:46, 22 December 2014
This is the New_3DS-only system application used for microSD data transfer for New3DS<>PC. This is launched via System Settings.
This uses the SMB protocol. When first starting the application it will ask for an username, password, and workgroup name, for accessing the New3DS with from a PC. These settings are then stored in savedata, so that info doesn't need setup each time the application is launched.
System Savedata
- "/Mcopy.dat" Filesize is (at least?) 0x68-bytes, contains the stored settings.
Savefile structure:
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | u32, unknown. Usually 1? |
| 0x4 | 0x4 | u32, unknown. Usually 1? |
| 0x8 | 0x20 | char[] wifi AP SSID |
| 0x28 | 0x10 | char[] SMB device name |
| 0x38 | 0x10 | char[] SMB workgroup name |
| 0x48 | 0x10 | char[] SMB username |
| 0x58 | 0x10 | char[] SMB password |