Difference between revisions of "CSND Registers"
Jump to navigation
Jump to search
| (5 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| + | =0x1EC03000= | ||
| + | ? | ||
| + | |||
=0x1EC03400= | =0x1EC03400= | ||
The channel registers are based at 0x1EC03400(process virtual address). There's 0x20-bytes total for each channel slot, thus the base-address for a channel's slot is determined with: 0x1EC03400 + (channel_index*0x20). The below offsets are relative to these channel register slots. | The channel registers are based at 0x1EC03400(process virtual address). There's 0x20-bytes total for each channel slot, thus the base-address for a channel's slot is determined with: 0x1EC03400 + (channel_index*0x20). The below offsets are relative to these channel register slots. | ||
| Line 9: | Line 12: | ||
| 0x0 | | 0x0 | ||
| 2 | | 2 | ||
| − | | REG_CSNDCHANX_CNT | + | | REG_CSNDCHANX_CNT. For Type0 [[CSND_Shared_Memory|Cmd]] 0xE, CSND module basically writes this value here: u16 (cmdword[2] & 0xFFFF). |
|- | |- | ||
| 0x2 | | 0x2 | ||
| Line 51: | Line 54: | ||
| CSND module writes value zero here immediately after it writes to chanslotreg+0x18. | | CSND module writes value zero here immediately after it writes to chanslotreg+0x18. | ||
|} | |} | ||
| + | |||
| + | =0x1EC03800= | ||
| + | |||
| + | There are two capture unit slot located at 0x1EC03800. Each slot has 0x10 bytes. | ||
Latest revision as of 02:32, 21 April 2019
0x1EC03000[edit]
?
0x1EC03400[edit]
The channel registers are based at 0x1EC03400(process virtual address). There's 0x20-bytes total for each channel slot, thus the base-address for a channel's slot is determined with: 0x1EC03400 + (channel_index*0x20). The below offsets are relative to these channel register slots.
| Relative offset | Size | Description |
|---|---|---|
| 0x0 | 2 | REG_CSNDCHANX_CNT. For Type0 Cmd 0xE, CSND module basically writes this value here: u16 (cmdword[2] & 0xFFFF). |
| 0x2 | 2 | For Type0 Cmd 0xE, CSND module writes this value here: 0 - (cmdword[2]>>16). |
| 0x4 | 2 | For Type0 Cmd 0xE, CSND module writes value 0 here. |
| 0x6 | 2 | For Type0 Cmd 0xE, CSND module writes value 0 here. |
| 0x8 | 2 | For Type0 Cmd 0xE, CSND module writes this value here: (u16)cmdword[4]. |
| 0xA | 2 | For Type0 Cmd 0xE, CSND module writes this value here: cmdword[4]>>16. |
| 0xC | 4 | This is the audio data physical address, for the main channel. |
| 0x10 | 4 | This is the audio data total byte-size. The CSND module masks the size loaded from the Type0 command-data with value 0x7FFFFFF, which is then used when writing these registers. |
| 0x14 | 4 | This is the audio data physical address, for the second channel. When this is not 0x0 stereo audio is used, otherwise mono audio is used. |
| 0x18 | 4 | When CSND module handles type0 Cmd 0xE with encoding!=IMA-ADPCM, CSND module sets this to zero. This register can be initialized via CSND module type0 Cmd 0xB. |
| 0x1C | 4 | CSND module writes value zero here immediately after it writes to chanslotreg+0x18. |
0x1EC03800[edit]
There are two capture unit slot located at 0x1EC03800. Each slot has 0x10 bytes.