Difference between revisions of "2.1.0-3"

From 3dbrew
Jump to navigation Jump to search
(Created page with "The 2.1.0 system version is a Old3ds version only. However, this version was used a lot because in this version is still possible to dump the otp in arm9 kernel mode due to a...")
 
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
The 2.1.0 system version is a Old3ds version only.
+
The 2.1.0-3 system version released on June 15, 2011 for the original Nintendo 3DS.
−
However, this version was used a lot because in this version is still possible to dump the otp in arm9 kernel mode due to a bug.
 
−
So, this version was used to dump the otp.bin necessary to install (the now outdated) Arm9LoaderHax.
 
−
This version has a lot of bugs, for example spider (a browser exploit in arm9 kernel mode), the colors has lots of weird glitches, and can brick Old 2ds and New3ds/2ds if you do the following:
 
  
−
If you format an old2ds you aren't able to complete the Setup because the system tells you to turn on the 3D, but since the 2ds doesn't have this feature you are in a softbrick that is recoverable with a copy of Cubic Ninja or with NtrBootHax.
+
==Change-Log==
−
If you format a New3ds you will brick because the system will act as an old3ds.
+
[https://en-americas-support.nintendo.com/app/answers/detail/a_id/231/~/system-menu-update-history#v210 Official] USA change-log:
−
If you go in Sleep Mode on a New3ds, if you re-open the console the screens are still black and you have bricked
+
*Improvement to system stability and convenience.
 +
 
 +
 
 +
Beginning in early 2016, 2.1.0-3 was installed onto the system's NAND as a necessary installation step for [[3DS_System_Flaws#arm9loader|arm9loaderhax]], to retrieve a console-specific OTP dump.
 +
As this firmware naturally didn't release for any console aside from the CTR-001 Nintendo 3DS, installation on newer devices nets known issues such as corrupted screen data, softlocks, and potential to software brick on FTR-001/Nintendo 2DS units upon formatting the console.
 +
 
 +
[[Category:Firmware Versions]]

Latest revision as of 20:19, 17 March 2021

The 2.1.0-3 system version released on June 15, 2011 for the original Nintendo 3DS.

Change-Log[edit]

Official USA change-log:

  • Improvement to system stability and convenience.


Beginning in early 2016, 2.1.0-3 was installed onto the system's NAND as a necessary installation step for arm9loaderhax, to retrieve a console-specific OTP dump. As this firmware naturally didn't release for any console aside from the CTR-001 Nintendo 3DS, installation on newer devices nets known issues such as corrupted screen data, softlocks, and potential to software brick on FTR-001/Nintendo 2DS units upon formatting the console.

Retrieved from "https://www.3dbrew.org/w/index.php?title=2.1.0-3&oldid=21498"