Changes

| 1 = enable legacy mode.

| 1 = enable legacy mode.

|}

|}

To boot into DSi or GBA mode first set register 0x10018000 to the desired mode and setup LgyFb. Then disable FCRAM by clearing bit 0 in reg 0x10201000, writing 0 to CFG11_GPU_FCRAM_CNT followed by 1 and waiting for bit 3 to clear.

To boot into DSi or GBA mode first set register 0x10018000 to the desired mode and setup LgyFb. Then disable FCRAM by clearing bit 0 in reg 0x10201000, writing 0 to CFG11_FCRAM_CNT followed by 1 and waiting for bit 3 to clear.

The very last 3DS-mode register poke the [[FIRM|TWL_FIRM]] Process9 does before it gets switched into TWL-mode, is writing 0x8000 to this register. Before writing this register, TWL Process9 waits for ARM7 to change the value of this register. The Process9 code for this runs from ITCM, since switching into TWL-mode includes remapping all ARM9 physical memory.

The very last 3DS-mode register poke the [[FIRM|TWL_FIRM]] Process9 does before it gets switched into TWL-mode, is writing 0x8000 to this register. Before writing this register, TWL Process9 waits for ARM7 to change the value of this register. The Process9 code for this runs from ITCM, since switching into TWL-mode includes remapping all ARM9 physical memory.