Trusted
225
edits
Changes
Jump to navigation
Jump to search
mLine 552:
Line 552: − +
Put the assembly opcode in a code section to make it appearent that it's an assembly opcode and not part of some English sentence
=MCU firmware versions=
=MCU firmware versions=
These reside in mcu-module .rodata, are uploaded to MCU register 0x05 and are usually 0x4003 bytes in size (the actual firmware is 0x4000 bytes preceeded by a 3 byte RL78 assembly opcode "jhl" (or 0xffe68, #108) to switch the I2C comms into flash write mode).
These reside in mcu-module .rodata, are uploaded to MCU register 0x05 and are usually 0x4003 bytes in size (the actual firmware is 0x4000 bytes preceeded by a 3 byte RL78 assembly opcode "<code>jhl</code>" (<code>or 0xffe68, #108</code>) to switch the I2C comms into flash write mode).
Before the upload could commence, WiFi interrupts are turned off via GPIO command 0x00020080(0, 0x40000), then after the upload completed, the sysmodule waits exactly one second for the MCU to reboot, then turns WiFi interrupts back on via <code>gpio:MCU</code> command 0x00020080(0x40000, 0x40000).
Before the upload could commence, WiFi interrupts are turned off via GPIO command 0x00020080(0, 0x40000), then after the upload completed, the sysmodule waits exactly one second for the MCU to reboot, then turns WiFi interrupts back on via <code>gpio:MCU</code> command 0x00020080(0x40000, 0x40000).