Difference between revisions of "NFCP:SendTagCommand"
Jump to navigation
Jump to search
(Created page with "=Request= {{IPC/Request}} {{#vardefine:ipc_offset|0}} {{IPC/RequestEntry|Header code [0x000500C2]}} {{IPC/RequestEntry|u32 inputsize}} {{IPC/RequestEntry|u32 outputsize}} {{IP...") |
(No difference)
|
Latest revision as of 19:33, 17 February 2017
Request[edit]
| Index Word | Description |
|---|---|
| 0 | Header code [0x000500C2] |
| 1 | u32 inputsize |
| 2 | u32 outputsize |
| 3 | u32 timing value. This is the raw version of the NFC:SendTagCommand timing field. |
| 4 | Descriptor for static buffer (id 0) |
| 5 | Input buffer address with static_buf_id=0 |
The handler for this IPC command expects the following 0x100-bytes after the beginning of the above command buffer:
| Index Word | Description
|
|---|---|
| 0 | Descriptor for static buffer (id 0) |
| 1 | Output buffer address |
Response[edit]
| Index Word | Description |
|---|---|
| 0 | Header code |
| 1 | Result code |
| 2 | u32 actual_output_size |
| 3 | Descriptor for static buffer (id 0) |
| 4 | Output data pointer with static_buf_id=0 |
Description[edit]
This is about the same as NFCS:SendTagCommand, except that this verifies that the input/output buffer ptrs are not NULL. This also clears the output buffer before calling the cmd-sending func. A state field(probably TagState?) must match 3.
outputsize value 0x800 will be used when it's >=0x800.